Home › BRAKE › BRAKE › BRAKE PEDAL (w/ VSC)

BRAKE PEDAL (w/ VSC) > REASSEMBLY

for Preparation Click here



1. INSTALL BRAKE PEDAL PAD


2. INSTALL STOP LIGHT SWITCH ASSEMBLY
(Click here)


3. INSTALL BRAKE PEDAL SUB-ASSEMBLY


    C226779E01
  1. Apply a light coat of lithium soap base glycol grease to 2 new bushes, the brake pedal shaft collar and shaft.

  1. Install the brake pedal shaft collar and 2 bushes to the pedal.

  1. Install the pedal to the support with the shaft and nut.

    Torque:
    37 N*m{ 375 kgf*cm , 27 ft.*lbf }