Home › DRIVE LINE › DIFFERENTIAL › FRONT DIFFERENTIAL CARRIER ASSEMBLY

FRONT DIFFERENTIAL CARRIER ASSEMBLY > REMOVAL

for Preparation Click here



1. REMOVE NO. 1 ENGINE UNDER COVER


2. REMOVE NO. 2 ENGINE UNDER COVER


3. DRAIN DIFFERENTIAL OIL


  1. for front differential:

    1. Stop the vehicle on a level surface.



    2. A272242E01
    3. Using SST and the 10 mm straight hexagon wrench, 10 mm union nut wrench and socket adaptor, remove the differential filler plug and gasket.

      SST
      09961-00950  
      Text in Illustration 
      *1
      10 mm Straight Hexagon Wrench
      *2
      10 mm Union Nut Wrench
      *3
      Socket Adaptor

    4. Remove the drain plug and gasket, and drain the oil.

    5. Install a new gasket and the drain plug.

      Torque:
      65 N*m{ 660 kgf*cm , 48 ft.*lbf }

  1. for rear differential:

    1. Stop the vehicle on a level surface.

    2. Remove the differential filler plug and gasket.

    3. Remove the drain plug and gasket, and drain the oil.

    4. Install a new gasket and the drain plug.

      Torque:
      49 N*m{ 500 kgf*cm , 36 ft.*lbf }



4. REMOVE FRONT PROPELLER SHAFT ASSEMBLY
  1. for TAW Made:
    (Click here)

  1. for ASSB Made:
    (Click here)

  1. for TASA Made:
    (Click here)

  1. for TDV Made:
    (Click here)

  1. for TMT Made:
    (Click here)



5. REMOVE FRONT DRIVE SHAFT ASSEMBLY LH
(Click here)


6. REMOVE FRONT DRIVE SHAFT ASSEMBLY RH

HINT:
Use the same procedure described for the LH side.



7. REMOVE FRONT DIFFERENTIAL CARRIER ASSEMBLY
  1. Remove the bolt and disconnect the differential breather tube bracket.

  1. Support the differential with a jack.



    C237474E01
  1. Remove the No. 1 differential mounting nut.
    Text in Illustration 
    *1
    Mounting Bolt
    *2
    Mounting Nut

  1. Remove the 2 mounting bolts and 2 nuts.

  1. Lower the jack and remove the front differential.



    C237475
  1. Remove the 3 bolts and front No. 1 differential support.

  1. Remove the 2 mount stoppers from the differential support.



    C237476
  1. Remove the 2 bolts and front No. 2 differential support.

  1. Remove the 2 mount stoppers from the differential support.



    C237477
  1. Remove the 2 bolts and front No. 3 differential support.