Home › TRANSMISSION ยท A343E AUTOMATIC TRANSMISSION › FLOOR SHIFT ASSEMBLY

FLOOR SHIFT ASSEMBLY > INSTALLATION

for Preparation Click here



1. INSTALL FLOOR SHIFT ASSEMBLY


G037855E01
  1. Install the floor shift with the 4 bolts.

    Torque:
    14 N*m{ 143 kgf*cm , 10 ft.*lbf }



    G037854E01
  1. Connect the clamp and 2 connectors.

  1. Move the shift lever to L.

  1. Connect the transmission control cable.



2. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.



3. ADJUST SHIFT LEVER POSITION
  1. Move the shift lever to N.



    G034515E02
  1. Remove the nut and disconnect the control cable.



    D028682E01
  1. Turn the control shaft lever clockwise until it stops, and then turn it counterclockwise 2 notches to set it to the N position.

  1. While holding the control shaft lever slightly toward the R position side, connect the cable with the nut.

    Torque:
    14 N*m{ 143 kgf*cm , 10 ft.*lbf }



4. INSPECT SHIFT LEVER POSITION
  1. When moving the shift lever from P to R with the ignition switch to ON and the brake pedal depressed, make sure that the shift lever moves smoothly and correctly into position.

  1. Start the engine and make sure that the vehicle moves forward after moving the shift lever from N to D, and moves in reverse after shifting to R.
    If the results are not as specified, inspect the park/ neutral position switch and check the shift lever.



5. INSTALL CONSOLE BOX ASSEMBLY

HINT:
Refer to "INSTRUMENT PANEL-LOWER INSTRUMENT PANEL-INSTALLATION" and install the console box.



6. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY

HINT:
Refer to "INSTRUMENT PANEL-LOWER INSTRUMENT PANEL-INSTALLATION" and install the upper console panel.



7. INSTALL PARKING BRAKE HOLE COVER SUB-ASSEMBLY

HINT:
Refer to "INSTRUMENT PANEL-LOWER INSTRUMENT PANEL-INSTALLATION" and install the parking brake hole cover.



8. PERFORM INITIALIZATION
  1. Perform initialization (Click here).