Home › BODY ELECTRICAL › WIPER AND WASHER › WIPER SWITCH

WIPER SWITCH > REMOVAL

for Preparation Click here



1. PRECAUTION

NOTICE:
After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work (Click here).



2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).



3. REMOVE STEERING COLUMN UPPER COVER


    C238860
  1. Remove the 3 screws and lower cover.



4. REMOVE STEERING COLUMN LOWER COVER


    C238860
  1. Remove the 3 screws and lower cover.



5. REMOVE WINDSHIELD WIPER SWITCH ASSEMBLY


    E225945
  1. Disconnect the connectors.

  1. Detach the claw and remove the windshield wiper switch.

    NOTICE:
    Do not push the claw with excessive force as damage may occur.