FRONT CRANKSHAFT OIL SEAL > INSTALLATION |
| 1. INSTALL FRONT CRANKSHAFT OIL SEAL |
Apply MP grease to the lip of a new crankshaft oil seal.
![]() |
Using SST and a hammer, tap in the crankshaft oil seal until its surface is flush with the timing gear cover edge.
| 2. INSTALL CRANKSHAFT PULLEY |
Align the keyway of the pulley with the key located on the crankshaft, and then slide the pulley into place to install it.
![]() |
Using SST, install the pulley bolt.
| 3. INSTALL RADIATOR ASSEMBLY |