STARTER (for 1.6 kW Type) > INSTALLATION |
| 1. INSTALL STARTER ASSEMBLY |
![]() |
Install the starter with the 2 bolts.
Install the starter wire to terminal 30 with the nut.
Attach the terminal cap.
Connect the starter connector.
A/T:
Install the A/T oil dipstick with the 2 bolts.
M/T:
Install the clutch release cylinder.
| 2. INSTALL FRONT FENDER SEAL |
Install the fender seal with the 5 clips.
| 3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |