Home › ENGINE ยท 2TR-FE › STARTING › IGNITION SWITCH

IGNITION SWITCH > INSTALLATION

for Preparation Click here



1. INSTALL IGNITION SWITCH ASSEMBLY


    A099992E04
  1. Install the switch to the steering column bracket upper with the 2 claws.



2. CONNECT CONNECTOR


    G039728E01
  1. Connect the 9 connectors shown in the illustration.

  1. Secure the wire harness with the clamps.



3. INSTALL STEERING COLUMN COVER LOWER


    G036625E02
  1. Install the cover lower with the 3 screws.

    HINT:
    Turn the steering wheel to the right and left as necessary to install the 3 screws and cover lower.



4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).