IGNITION SWITCH > REMOVAL |
| 1. PRECAUTION |
| 2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
| 3. REMOVE STEERING COLUMN COVER LOWER |
![]() |
Remove the 3 screws and steering column cover lower.
| 4. DISCONNECT CONNECTOR |
![]() |
Disconnect the 9 connectors and detach the wire harness clamps from the steering column.
| 5. REMOVE IGNITION SWITCH ASSEMBLY |
![]() |
Detach the 2 claws and remove the switch from the steering column bracket upper.