WATER PUMP > REMOVAL |
| 1. REMOVE NO. 1 ENGINE UNDER COVER |
| 2. DRAIN ENGINE COOLANT |
Remove the radiator cap.
Loosen the cylinder block drain cock plug and radiator drain cock plug to drain the coolant.

| 3. DISCONNECT RADIATOR HOSE INLET |
Disconnect the radiator hose inlet from the radiator.
| 4. DISCONNECT RADIATOR HOSE OUTLET |
Disconnect the radiator hose outlet from the radiator.
| 5. DISCONNECT AIR PUMP INLET |
![]() |
Remove the bolt and disconnect the air pump inlet from the radiator.
| 6. REMOVE FAN SHROUD |
![]() |
Disconnect the reservoir hose from the radiator.
Loosen the 4 nuts holding the fluid coupling fan.
Remove the drive belt (Click here).
Remove the 2 bolts holding the fan shroud.
Remove the 4 nuts holding the fluid coupling fan, and then remove the fan shroud together with the fluid coupling fan.
Remove the fan pulley from the engine water pump.
| 7. REMOVE GENERATOR ASSEMBLY |
| 8. REMOVE ENGINE OIL LEVEL DIPSTICK GUIDE |
Remove the engine oil level dipstick.
Remove the bolt and engine oil level dipstick guide.
Remove the O-ring from the engine oil level dipstick guide.
| 9. REMOVE NO. 1 IDLER PULLEY SUB-ASSEMBLY |
![]() |
Remove the bolt, pulley and spacer.
| 10. REMOVE V-RIBBED BELT TENSIONER ASSEMBLY |
![]() |
Remove the 3 bolts and tensioner.
| 11. REMOVE ENGINE WATER PUMP ASSEMBLY |
![]() |
Remove the 10 bolts, engine water pump and gasket.