Home › ENGINE ยท 1GR-FE › FUEL › FUEL PUMP RESISTOR

FUEL PUMP RESISTOR > INSTALLATION

for Preparation Click here



1. INSTALL FUEL PUMP RESISTOR


A111947
  1. Install the resistor with the bolt.

    Torque:
    7.5 N*m{ 76 kgf*cm , 66 in.*lbf }

  1. Connect the connector.



2. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).