REAR BLOWER MOTOR > INSTALLATION |
| 1. INSTALL REAR BLOWER MOTOR WITH FAN SUB-ASSEMBLY |
Install the rear blower motor with fan sub-assembly with the 3 screws.
Connect the connector.
| 2. INSTALL QUARTER INSIDE TRIM BOARD RH |
Detach the 8 claws and 10 clips to install the quarter inside trim board.
Install the clip.
w/ Rear No. 2 Seat:
Connect the rear No. 2 seat outer belt floor anchor with the bolt.
Connect the rear No. 1 seat outer belt floor anchor with the bolt.
Attach the 2 claws to install the outer lap belt anchor cover.
| 3. INSTALL QUARTER TRIM HOOK |
Install the quarter trim hook with the screw.
| 4. INSTALL BACK DOOR SCUFF PLATE |
Attach the 4 claws, 2 guides and 6 clips to install the back door scuff plate.
| 5. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP RH |
| 6. INSTALL REAR DOOR SCUFF PLATE RH |
| 7. INSTALL TONNEAU COVER HANGER RH (w/ Tonneau Cover) |
| 8. INSTALL TONNEAU COVER HOLDER RH (w/ Tonneau Cover) |
| 9. INSTALL TONNEAU COVER ASSEMBLY (w/ Tonneau Cover) |
Install the tonneau cover.
| 10. INSTALL REAR NO. 2 SEAT ASSEMBLY (w/ Rear No. 2 Seat) |