Home › BODY ELECTRICAL › AUDIO / VISUAL › AMPLIFIER ANTENNA

AMPLIFIER ANTENNA > REMOVAL

for Preparation Click here



1. PRECAUTION

NOTICE:
After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work (Click here).



2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).



3. REMOVE ROOF HEADLINING ASSEMBLY
(Click here)


4. REMOVE ANTENNA WITH HOLDER ASSEMBLY (w/o Rear Air Conditioning System)


  1. Disconnect the 2 connectors.


    E236674

  1. Detach the 13 clamps.



    B118556
  1. Disconnect the 2 connectors.



5. REMOVE ANTENNA WITH HOLDER ASSEMBLY (w/ Rear Air Conditioning System)
  1. Remove the bolt and antenna.



  1. Disconnect the connector.


    B210120

  1. Detach the 11 clamps.



    B206120
  1. Disconnect the connector.

  1. Remove the bolt and antenna.