PARKING BRAKE CABLE (for 4WD and Pre-Runner) > REMOVAL |
| 1. PRECAUTION |
| 2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
| 3. REMOVE REAR WHEEL |
| 4. REMOVE REAR BRAKE DRUM SUB-ASSEMBLY |
Release the parking brake lever, and remove the drum.
![]() |
Remove the hole plug (adjust) and insert a screwdriver into the hole on the backing plate, and hold the automatic adjust lever away from the adjuster.
Using another screwdriver, compress the shoe adjuster by turning the adjusting wheel.
| 5. REMOVE CONSOLE BOX ASSEMBLY |
| 6. REMOVE NO. 1 PARKING BRAKE CABLE ASSEMBLY |
Disconnect the No. 1 parking brake cable from the parking brake lever (Click here).
Remove the 2 bolts and No. 1 heat insulator.
Remove the No. 1 clip and pin from the No. 3 parking brake cable.

| *1 | No. 1 Parking Brake Cable | *2 | No. 3 Parking Brake Cable |
| *3 | Parking Brake Equalizer | *4 | Cable Support Bracket |
Disconnect the No. 1 parking brake cable from the No. 3 parking brake cable.
Disconnect the No. 1 parking brake cable from the parking brake equalizer.
Remove the bolt holding the No. 1 parking brake cable.
Remove the No. 1 parking brake cable clamp from the No. 1 parking brake cable.
Disconnect the No. 1 parking brake cable from the cable support bracket.
Remove the No. 1 parking brake cable.
| 7. REMOVE NO. 2 PARKING BRAKE CABLE ASSEMBLY |
Disconnect the No. 2 parking brake cable from the parking brake shoe lever RH and backing plate RH.
Disconnect the No. 2 parking brake cable from the parking brake shoe lever (Click here).
Remove the 2 bolts and disconnect the No. 2 parking brake cable from the backing plate.
Remove the 3 bolts and No. 2 heat insulator.
Disconnect the No. 2 parking brake cable from the parking brake equalizer.

| *1 | No. 2 Parking Brake Cable | *2 | Parking Brake Equalizer |
Remove the 4 bolts and No. 2 parking brake cable.
| 8. REMOVE NO. 3 PARKING BRAKE CABLE ASSEMBLY |
Disconnect the No. 3 parking brake cable from the parking brake shoe lever LH and backing plate LH.
Disconnect the No. 3 parking brake cable from the parking brake shoe lever (Click here).
Remove the 2 bolts and disconnect the No. 3 parking brake cable from the backing plate.
Remove the No. 3 clip.

| *1 | No. 3 Parking Brake Cable | *2 | No. 3 Clip |
Remove the 4 bolts, nut and No. 3 parking brake cable.