Home › RESTRAINTS › SEAT BELT › FRONT SEAT INNER BELT ASSEMBLY (for Power Seat)

FRONT SEAT INNER BELT ASSEMBLY (for Power Seat) > INSTALLATION

for Preparation Click here



1. INSTALL FRONT SEAT INNER BELT ASSEMBLY LH


B210576E01
  1. Install the buckle cover.

  1. Install the front seat inner belt assembly with the nut.

    Torque:
    42 N*m{ 428 kgf*cm , 31 ft.*lbf }

    NOTICE:
    Do not allow the anchor part of the front seat inner belt assembly to overlap the protruding part of the front seat adjuster.

  1. Connect the connector and attach the 3 clamps.



2. INSTALL FRONT SEAT CUSHION SHIELD INNER LH
  1. Attach the claw and guide to install the front seat cushion shield LH with the front inner No. 1 seat cushion shield LH.

  1. Install the 3 screws.

  1. Install the 2 screws.



3. INSTALL FRONT SEAT INNER BELT ASSEMBLY RH
  1. Install the buckle cover.



    B084928E01
  1. Install the front seat inner belt assembly with the nut.

    Torque:
    42 N*m{ 428 kgf*cm , 31 ft.*lbf }

    NOTICE:
    Do not allow the anchor part of the front seat inner belt assembly to overlap the protruding part of the front seat adjuster.

  1. Connect the 2 connectors and attach the 2 clamps.



4. INSTALL FRONT SEAT ASSEMBLY LH
  1. Install the front seat assembly (Click here).



5. INSTALL FRONT SEAT ASSEMBLY RH
  1. Install the front seat assembly (Click here).



6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).