Home › ENGINE ยท 2TR-FBE › FUEL › FUEL PUMP (for Fuel Sub Tank)

FUEL PUMP (for Fuel Sub Tank) > INSTALLATION

for Preparation Click here



1. INSTALL CHECK VALVE GASKET
  1. Apply a light coat of gasoline to a new check valve gasket, and then install the gasket.



2. INSTALL FUEL PUMP
  1. Insert the fuel pump.



3. INSTALL NO. 2 FUEL TUBE SUB-ASSEMBLY


    A239220E01
  1. Connect the No. 2 fuel tube sub-assembly, and then attach the clamp.

    NOTICE:
    Install the marked area of the No. 2 fuel tube sub-assembly to the clamp.

  1. Connect the fuel pump connector.



4. ADD FUEL


5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).



6. INSPECT FOR FUEL LEAK (for Fuel Sub Tank)
  1. Start the engine.

    NOTICE:
    Perform the inspection while the engine is cold.
    The fuel pump operates only for a certain amount of time when the coolant temperature is 20°C (68°F) or less and the learned ethanol concentration is 85% or more.

  1. Check for fuel leaks.

    1. Check that there are no fuel leaks from the fuel system after doing any maintenance or repairs. If there is a fuel leak, repair or replace parts as necessary.