Home › ENGINE ยท 2TR-FBE › FUEL › FUEL SENDER GAUGE ASSEMBLY (for Fuel Main Tank)

FUEL SENDER GAUGE ASSEMBLY (for Fuel Main Tank) > INSTALLATION

for Preparation Click here


NOTICE:
Do not try to remove the black vinyl hose as it is welded to the fuel suction tube assembly (Click here).



1. INSTALL FUEL SENDER GAUGE ASSEMBLY


    A169308
  1. Install the fuel sender gauge assembly by sliding it downward.



    A237765
  1. Connect the connector of the fuel sender gauge assembly.



2. INSTALL FUEL SUCTION WITH PUMP AND GAUGE TUBE ASSEMBLY
(Click here)