Home › RESTRAINTS › SUPPLEMENTAL RESTRAINT SYSTEM › CURTAIN SHIELD AIRBAG ASSEMBLY

CURTAIN SHIELD AIRBAG ASSEMBLY > INSTALLATION

for Preparation Click here


HINT:
  1. Use the same procedure for the RH and LH sides.
  2. The procedure listed below is for the LH side.



1. INSTALL CURTAIN SHIELD AIRBAG ASSEMBLY LH


  1. Attach the 2 claws and temporarily install the 2 bolts in the order shown in the illustration (arrows 1 through 4).


    B292845E01



  1. Tighten the 2 bolts in the order shown in the illustration (arrows 1 through 2).


    B292788E01

    Torque:
    11 N*m{ 112 kgf*cm , 8 ft.*lbf }

    NOTICE:
    Do not twist the curtain shield airbag when installing it.

  1. Attach the 7 claws and install the 7 bolts in the order shown in the illustration to install the curtain shield airbag assembly LH (arrows 3 through 16).

    Torque:
    11 N*m{ 112 kgf*cm , 8 ft.*lbf }

    NOTICE:
    Do not twist the curtain shield airbag when installing it.



    B211466
  1. Connect the connector.

    NOTICE:
    When handling the airbag connector, take care not to damage the airbag wire harness.



2. INSTALL ROOF HEADLINING ASSEMBLY
(Click here).