FRONT WIPER MOTOR > ON-VEHICLE INSPECTION |
| 1. INSPECT WINDSHIELD WIPER LINK ASSEMBLY (for LHD) |
![]() |
Operate the front wipers while spraying washer fluid on the windshield glass. Make sure that the front wipers function properly and the wipers do not come into contact with the vehicle body.
| Area | Standard Condition |
| A | 25.0 mm (0.984 in.) |
| B | 30.4 mm (1.19 in.) |
| C | 24.3 mm (0.956 in.) |
| D | 24.7 mm (0.972 in.) |
| E | 19.0 mm (0.748 in.) |
Stop the front wiper motor and link assembly operation.
![]() |
Check the automatic stop position.
| *A | for LH Side |
| *B | for RH Side |
| *1 | Louver Edge |
| Area | Standard Condition |
| A | 25 mm (0.984 in.) |
| B | 33 mm (1.29 in.) |
| C | 25 mm (0.984 in.) |
| D | 25 mm (0.984 in.) |
| 2. INSPECT WINDSHIELD WIPER LINK ASSEMBLY (for RHD) |
![]() |
Operate the front wipers while spraying washer fluid on the windshield glass. Make sure that the front wipers function properly and the wipers do not come into contact with the vehicle body.
| Area | Standard Condition |
| A | 25.0 mm (0.984 in.) |
| B | 30.4 mm (1.19 in.) |
| C | 24.3 mm (0.956 in.) |
| D | 24.7 mm (0.972 in.) |
| E | 19.0 mm (0.748 in.) |
Stop the front wiper motor and link assembly operation.
![]() |
Check the automatic stop position.
| *A | for RH Side |
| *B | for LH Side |
| *1 | Louver Edge |
| Area | Standard Condition |
| A | 25 mm (0.984 in.) |
| B | 33 mm (1.29 in.) |
| C | 25 mm (0.984 in.) |
| D | 25 mm (0.984 in.) |