FUEL FILTER > REPLACEMENT |
| 1. DISCHARGE FUEL SYSTEM PRESSURE |
| 2. PRECAUTION |
| 3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
| 4. REMOVE FUEL FILTER ASSEMBLY |
![]() |
Disconnect the No. 1 fuel hose (Click here).
![]() |
Disconnect the fuel filter from the bracket, and then disconnect the fuel main tube (Click here) and remove the fuel filter.
| 5. INSTALL FUEL FILTER ASSEMBLY |
Connect the fuel main tube to the fuel filter (Click here), and then connect the fuel filter to the bracket.
Connect the No. 1 fuel hose (Click here).
| 6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
| 7. INSPECT FOR FUEL LEAK (for Fuel Main Tank) |
Connect the intelligent tester to the DLC3.
Turn the ignition switch to ON.
Push the intelligent tester main switch on.
Select the Active Test and enter the following menus: Powertrain / Engine and ECT / Active Test / Control the Fuel Pump / Speed.
Check for fuel leaks.
Check that there are no fuel leaks after performing maintenance anywhere on the fuel system.
If there are fuel leaks, repair or replace parts as necessary.