EGR VALVE (w/ Glow Plug Controller) > INSTALLATION |
| 1. TEMPORARILY INSTALL INTAKE AIR CONNECTOR WITH ELECTRIC EGR CONTROL VALVE ASSEMBLY |
Install 2 new gaskets and the electric EGR control valve to the stud bolts of the intake air connector.
Temporarily install the intake air connector with electric EGR control valve to the EGR valve adapter with the 3 nuts.

| *1 | Intake Air Connector | *2 | New Gasket |
| *3 | Electric EGR Control Valve | *4 | EGR Valve Adapter |
| 2. INSTALL ELECTRIC EGR CONTROL VALVE ASSEMBLY WITH NO. 2 EGR VALVE AND EGR COOLER |
| 3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |