Home › Drivetrain › A750F AUTOMATIC TRANSMISSION / TRANSAXLE › TRANSMISSION CONTROL CABLE
RM33K0E _52 Drivetrain _043590 A750F AUTOMATIC TRANSMISSION / TRANSAXLE _0211186 TRANSMISSION CONTROL CABLE A

A750F AUTOMATIC TRANSMISSION / TRANSAXLE  TRANSMISSION CONTROL CABLE  INSTALLATION  


PROCEDURE

Hide 33820B 1.INSTALL TRANSMISSION CONTROL CABLE ASSEMBLY

a.

Install the transmission control cable assembly from outside the vehicle and attach the 3 claws of the cable retainer.


b.

Install the 2 nuts.

Torque:
5.5 N*m (56 kgf*cm, 49 in.*lbf)


c.

Connect the transmission control cable support to the vehicle body with the nut.

Torque:
5.5 N*m (56 kgf*cm, 49 in.*lbf)


d.

Connect the ground cable to the vehicle body with the nut.

Torque:
8.3 N*m (85 kgf*cm, 73 in.*lbf)


e.
C236140N02
1.375,0.104 1.604,0.292 0.229,0.188 10 false N 1.771,0.427 2.01,0.635 0.24,0.208 10 false R 2.292,0.323 2.448,0.5 0.156,0.177 10 false P

Turn the control shaft lever clockwise until it stops, and then turn it counterclockwise 2 notches to set it to the N position.


f.

Connect the transmission control cable assembly to the transmission control cable bracket with a new clip, and then connect the transmission control cable end to the control shaft lever LH with the nut.

Torque:
14 N*m (143 kgf*cm, 10 ft.*lbf)


Hide 33820B 2.CONNECT TRANSMISSION CONTROL CABLE ASSEMBLY