Home › Power Source / Network › 1GR-FE BATTERY / CHARGING › GENERATOR
RM33K0E _57 Power Source / Network _043598 1GR-FE BATTERY / CHARGING _0211296 GENERATOR A

1GR-FE BATTERY / CHARGING  GENERATOR  INSTALLATION  


PROCEDURE

Hide 27020 1.INSTALL GENERATOR ASSEMBLY

a.

Install the generator assembly with the 2 bolts.

Torque:
43 N*m (438 kgf*cm, 32 ft.*lbf)


b.
A347887N01
1.844,1.667 2,1.865 0.156,0.198 10 true A 0.958,1.792 1.115,1.99 0.156,0.198 10 true B

Install the generator bracket with the 2 bolts.

Torque:
for bolt A : 24.5 N*m (250 kgf*cm, 18 ft.*lbf)
for bolt B : 13.5 N*m (138 kgf*cm, 10 ft.*lbf)

HINT:

The bolts are stopper bolts, therefore, make sure to install the bolts so that they are level and there is no clearance between the bolts and surface.



c.

Install the differential breather bracket with the bolt.

Torque:
5.4 N*m (55 kgf*cm, 48 in.*lbf)


d.

Attach the clamp and connect the wire harness.


e.

Attach the clamp and connect the differential hose.


f.

Connect the charcoal canister hose and attach the clamp.


g.

Connect the wire harness together with the 2 wire harness brackets with the 2 bolts.

Torque:
13 N*m (133 kgf*cm, 10 ft.*lbf)


h.

Connect the generator connector to the generator assembly.


i.

Connect the wire harness to terminal B with the nut.

Torque:
9.8 N*m (100 kgf*cm, 87 in.*lbf)


j.

Install the terminal cap.


Hide 53737B 2.INSTALL FRONT UPPER FENDER APRON SEAL LH

Hide 3.INSTALL OIL BAFFLE PLATE

a.

Install the oil baffle plate with the bolt.

Torque:
9.0 N*m (92 kgf*cm, 80 in.*lbf)


Hide 16361A 4.INSTALL FAN AND GENERATOR V BELT

Hide 74431 5.INSTALL BATTERY TRAY

Hide 28800 6.INSTALL BATTERY

Hide 28899 7.INSTALL BATTERY INSULATOR

Hide 74404B 8.INSTALL BATTERY CLAMP SUB-ASSEMBLY

a.

Install the battery clamp sub-assembly with the 2 nuts and 2 battery clamp bolts.

Torque:
5.4 N*m (55 kgf*cm, 48 in.*lbf)


Hide 9.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION