Home › Power Source / Network › 2TR-FE BATTERY / CHARGING › GENERATOR(for 80A Type)
RM33K0E _57 Power Source / Network _043600 2TR-FE BATTERY / CHARGING _0211310 GENERATOR(for 80A Type) A

2TR-FE BATTERY / CHARGING  GENERATOR(for 80A Type)  INSTALLATION  


PROCEDURE

Hide 27020 1.INSTALL GENERATOR ASSEMBLY

a.

Install the generator assembly with the 2 bolts.

Torque:
43 N*m (438 kgf*cm, 32 ft.*lbf)


b.

Connect the wire harness to terminal B with the nut.

Torque:
9.8 N*m (100 kgf*cm, 87 in.*lbf)


c.

Install the generator bracket with the bolt.

Torque:
13 N*m (133 kgf*cm, 10 ft.*lbf)


d.

Install the terminal cap.


e.

Connect the generator connector.


Hide 16361A 2.INSTALL FAN AND GENERATOR V BELT

Hide 17701 3.INSTALL AIR CLEANER CASE SUB-ASSEMBLY

Hide 17801 4.INSTALL AIR CLEANER FILTER ELEMENT SUB-ASSEMBLY

Hide 17705 5.INSTALL AIR CLEANER CAP SUB-ASSEMBLY WITH NO. 1 AIR CLEANER HOSE

Hide 6.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION