Home › Drivetrain › RC61F MANUAL TRANSMISSION / TRANSAXLE › TRANSMISSION CASE OIL SEAL
RM33K0E _52 Drivetrain _043593 RC61F MANUAL TRANSMISSION / TRANSAXLE _0212112 TRANSMISSION CASE OIL SEAL A

RC61F MANUAL TRANSMISSION / TRANSAXLE  TRANSMISSION CASE OIL SEAL  REPLACEMENT  


PROCEDURE

Hide 31126 2.REMOVE CLUTCH RELEASE FORK BOOT

Hide 31230 3.REMOVE CLUTCH RELEASE BEARING ASSEMBLY

Hide 31236B 4.REMOVE RELEASE FORK SUPPORT

Hide 33124C 7.REMOVE NO. 1 OIL RECEIVER PIPE

a.

Remove the No. 1 oil receiver pipe from the front bearing retainer.


Hide 33131A 8.REMOVE FRONT TRANSMISSION BEARING RETAINER OIL SEAL

a.
C324152C01
0.823,0.156 1.719,0.604 true 0.625,0.052 0.938,0.208 0.313,0.156 10 false *a
*a Protective Tape


Using a screwdriver, pry out the front transmission bearing retainer oil seal.

NOTICE:

Do not damage the lip of the front transmission bearing retainer oil seal and front bearing contact surfaces.


HINT:

Tape the screwdriver tip before use.



Hide 33131A 9.INSTALL FRONT TRANSMISSION BEARING RETAINER OIL SEAL

a.
C324149N03
1.552,2.031 0.646,1.792 0.646,1.792 1.698,1.573 true 0.292,1.719 0.75,1.917 0.458,0.198 10 false SST

Using SST and a press, press in a new front transmission bearing retainer oil seal.

SST
09950-60010  (09951-00470)
09950-70010  (09951-07150)

Standard drive in depth:

0.8 to 1.8 mm (0.0315 to 0.0708 in.)



Hide 33124C 10.INSTALL NO. 1 OIL RECEIVER PIPE

a.

Install the No. 1 oil receiver pipe to the front bearing retainer.


Hide 31236B 13.INSTALL RELEASE FORK SUPPORT

Hide 31230 14.INSTALL CLUTCH RELEASE BEARING ASSEMBLY

Hide 31126 15.INSTALL CLUTCH RELEASE FORK BOOT