Home › Brake › PARKING BRAKE › PARKING BRAKE SYSTEM
RM33K0E _54 Brake _043537 PARKING BRAKE _0217752 PARKING BRAKE SYSTEM N

PARKING BRAKE  PARKING BRAKE SYSTEM  ADJUSTMENT  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for RHD and LHD vehicles.

·

The procedure listed below is for LHD vehicles.



PROCEDURE

Hide 1.CHECK PARKING BRAKE LEVER TRAVEL

a.

Pull the parking brake lever to fully engage the parking brake.


b.

Release the parking brake lever to disengage the parking brake.


c.

Slowly pull the parking brake lever all the way, and count the number of clicks.

Standard parking brake lever travel when pulled with a force of 200 N (20 kgf, 45 lbf):
for Rear Drum Brake:

7 to 9 clicks

for Rear Disc Brake:

8 to 10 clicks



Hide 58810J 2.REMOVE CONSOLE BOX ASSEMBLY

Hide 3.REMOVE REAR WHEEL

Hide 4.ADJUST REAR DRUM BRAKE SHOE CLEARANCE (for Rear Drum Brake)

Hide 5.ADJUST PARKING BRAKE LEVER TRAVEL (for Rear Drum Brake)

a.

Completely release the parking brake lever.


b.
C323611C01
1.083,1.5 1.552,1.5 true 1.083,0.917 1.417,0.917 1.417,0.917 1.677,1.365 true 0.833,1.417 1,1.583 0.167,0.167 10 true *2 0.833,0.833 1,1 0.167,0.167 10 true *1
*1 Lock Nut
*2 Adjusting Nut


Loosen the lock nut.


c.

Turn the adjusting nut until the parking brake lever travel is correct.

Standard parking brake lever travel when pulled with a force of 200 N (20 kgf, 45 lbf):

7 to 9 clicks



d.

Tighten the lock nut.

Torque:
5.2 N*m (53 kgf*cm, 46 in.*lbf)

HINT:

If the parking brake lever travel cannot be fully adjusted with this procedure, proceed to the adjust parking brake turn buckle procedure.



Hide 6.ADJUST PARKING BRAKE LEVER TRAVEL (for Rear Disc Brake)

a.

Completely release the parking brake lever.


b.
C323611C01
1.083,1.5 1.552,1.5 true 1.083,0.917 1.417,0.917 1.417,0.917 1.677,1.365 true 0.833,1.417 1,1.583 0.167,0.167 10 true *2 0.833,0.833 1,1 0.167,0.167 10 true *1
*1 Lock Nut
*2 Adjusting Nut


Loosen the lock nut.


c.

Temporarily install the hub nuts to the hub bolts.

HINT:

Securely install the hub nuts to the rear disc.



d.
C325021C01
0,0 0,0 false
V113147

Expand
V113148

Contract


Turn the shoe adjuster and expand the shoes until the disc locks.


e.

Turn and contract the shoe adjuster until the disc can rotate smoothly.

Standard:

Returns 8 notches.



f.

Check that there is no brake drag against the shoe.


g.

Turn the adjusting nut until the parking brake lever travel is correct.

Standard parking brake lever travel when pulled with a force of 200 N (20 kgf, 45 lbf):

8 to 10 clicks



h.

Tighten the lock nut.

Torque:
5.2 N*m (53 kgf*cm, 46 in.*lbf)


i.

Operate the parking brake lever 3 to 4 times, and check the parking brake lever travel.

Standard parking brake lever travel when pulled with a force of 200 N (20 kgf, 45 lbf):

8 to 10 clicks



j.

Check that the parking brake does not drag.


k.

Remove the hub nuts from the hub bolts.

HINT:

If the parking brake lever travel cannot be fully adjusted with this procedure, proceed to the adjust parking brake turn buckle procedure.



Hide 7.ADJUST PARKING BRAKE TURN BUCKLE

a.
C321812C01
0.667,0.948 0.667,0.5 0.667,0.5 0.833,0.5 false 2.25,0.865 2.25,0.5 2.25,0.5 2.417,0.5 false 0.917,0.417 1.083,0.583 0.167,0.167 10 false *1 2.5,0.417 2.667,0.583 0.167,0.167 10 false *2
*1 Lock Nut
*2 Parking Brake Turn Buckle


Loosen the lock nut and turn the parking brake turn buckle until the lever travel is correct.

Standard parking brake lever travel when pulled with a force of 200 N (20 kgf, 45 lbf):
for Rear Drum Brake:

7 to 9 clicks

for Rear Disc Brake:

8 to 10 clicks



b.

Tighten the lock nut.

Torque:
5.0 N*m (51 kgf*cm, 44 in.*lbf)


Hide 8.INSPECT BRAKE WARNING LIGHT

a.

Operate the parking brake lever and check the illumination condition of the brake warning light.

OK:

The brake warning light always illuminates at the first click.



Hide 58810J 9.INSTALL CONSOLE BOX ASSEMBLY

Hide 10.INSTALL REAR WHEEL