Home › Brake › PARKING BRAKE › PARKING BRAKE ASSEMBLY(for Rear Disc Brake)
RM33K0E _54 Brake _043537 PARKING BRAKE _0217755 PARKING BRAKE ASSEMBLY(for Rear Disc Brake) A

PARKING BRAKE  PARKING BRAKE ASSEMBLY(for Rear Disc Brake)  DISASSEMBLY  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 1.REMOVE REAR WHEEL

Hide 47850 2.DISCONNECT REAR DISC BRAKE CYLINDER ASSEMBLY LH

a.
C325029

Remove the 2 bolts and disconnect the rear disc brake cylinder assembly LH.

NOTICE:
·

Do not disconnect the flexible hose from the rear disc brake cylinder assembly LH.

·

Do not twist or bend the flexible hose.




Hide 46550E 4.REMOVE PARKING BRAKE SHOE RETURN TENSION SPRING

a.
C321843

Remove the 2 parking brake shoe return tension springs.

NOTICE:

Be sure to put an identification mark on each parking brake shoe return tension spring so that it can be reinstalled to its original position.



Hide 46590 5.DISCONNECT NO. 2 PARKING BRAKE SHOE ASSEMBLY LH

a.
C321844C01
2,1.167 2.25,0.583 2.25,0.583 2.5,0.583 true 2.583,0.5 2.917,0.667 0.333,0.167 10 false SST
V113147

Push and Turn in this Direction


Using SST, remove the 2 parking brake shoe hold down spring cups and parking brake shoe hold down spring to disconnect the No. 2 parking brake shoe assembly LH from the backing plate.

SST
09718-00011  


Hide 47614 6.REMOVE PARKING BRAKE SHOE STRUT LH

a.
C321845C01
0,0 0,0 false
V113147

Pull in this Direction


Pull the No. 2 parking brake shoe assembly LH towards the front of the vehicle by hand as shown in the illustration.


b.
C321846

Remove the parking brake shoe strut LH.


Hide 47613D 7.REMOVE PARKING BRAKE SHOE STRUT COMPRESSION SPRING

a.
C321847

Remove the parking brake shoe strut compression spring.


Hide 46580 8.DISCONNECT NO. 1 PARKING BRAKE SHOE ASSEMBLY LH

a.
C321848C01
1.135,1.281 0.833,0.583 0.833,0.583 0.583,0.583 true 0.167,0.5 0.5,0.667 0.333,0.167 10 true SST
V113147

Push and Turn in this Direction


Using SST, remove the 2 parking brake shoe hold down spring cups and parking brake shoe hold down spring to disconnect the No. 1 parking brake shoe assembly LH from the backing plate.

SST
09718-00011  


Hide 47406A 9.REMOVE PARKING BRAKE SHOE ADJUSTING SCREW SET

a.
C321849C01
0,0 0,0 false
V113147

Expand in this Direction


Pull the No. 1 parking brake shoe assembly LH and No. 2 parking brake shoe assembly LH open by hand, and then pull them downward off the vehicle.


b.
C321850

Remove the parking brake shoe adjusting screw set.


Hide 46590 10.REMOVE NO. 2 PARKING BRAKE SHOE ASSEMBLY LH

a.
C321851

Disconnect the parking brake shoe return tension spring to remove the No. 2 parking brake shoe assembly LH.


Hide 46550E 11.REMOVE PARKING BRAKE SHOE RETURN TENSION SPRING

a.
C321852

Remove the parking brake shoe return tension spring from the No. 1 parking brake shoe assembly LH.


Hide 46580 12.REMOVE NO. 1 PARKING BRAKE SHOE ASSEMBLY LH WITH PARKING BRAKE SHOE LEVER

a.
C323602

Using needle-nose pliers, disconnect the No. 3 parking brake cable assembly from the parking brake shoe lever as shown in the illustration.

NOTICE:

Be careful not to damage the No. 3 parking brake cable assembly.



Hide 47612 13.REMOVE PARKING BRAKE SHOE LEVER LH

a.
C321854C01
0,0 0,0 false
V113147

Remove in this Direction


Remove the C-washer, shim and parking brake shoe lever LH from the No. 1 parking brake shoe assembly LH as shown in the illustration.


Hide 47447C 14.REMOVE PARKING BRAKE SHOE HOLD DOWN SPRING PIN

a.
C321855

for Front Side:

i.

Remove the parking brake shoe hold down spring pin.



b.
C321856

for Rear Side:

i.

Remove the parking brake shoe hold down spring pin



Hide 47456A 15.REMOVE PARKING BRAKE SHOE GUIDE PLATE

a.
C325020

Remove the parking brake shoe guide plate set bolt and parking brake shoe guide plate.