Home › Audio / Visual / Telematics › AUDIO / VIDEO › AUDIO AND VISUAL SYSTEM(for Radio and Display Type)
RM33K0E _56 Audio / Visual / Telematics _043541 AUDIO / VIDEO _0218826 AUDIO AND VISUAL SYSTEM(for Radio and Display Type) J

AUDIO / VIDEO  AUDIO AND VISUAL SYSTEM(for Radio and Display Type)  Speaker Circuit  


DESCRIPTION

If there is a short in a speaker circuit, the radio and display receiver assembly detects it and stops output to the speakers.

As a result, sound cannot be heard from the speakers even if there is no malfunction in the radio and display receiver assembly or speakers.

WIRING DIAGRAM

E306994E07
5.281,6.833 7.021,7.271 1.74,0.438 10 false Radio and Display Receiver Assembly 0.24,4.646 1.979,5.083 1.74,0.438 10 false M2 0.229,4.802 1.76,5.208 1.531,0.406 10 false Rear Speaker Assembly LH 0.229,5.938 1.969,6.375 1.74,0.438 10 false L2 0.219,6.104 1.75,6.573 1.531,0.469 10 false Rear Speaker Assembly RH 1.917,5.771 3.656,6.208 1.74,0.438 10 false 1 1.906,4.51 3.646,4.948 1.74,0.438 10 false 1 1.917,6.396 3.656,6.833 1.74,0.438 10 false 2 1.927,5.125 3.667,5.563 1.74,0.438 10 false 2 1.896,3.01 3.635,3.448 1.74,0.438 10 false 1 1.885,1.198 3.625,1.635 1.74,0.438 10 false 1 4.479,1.01 6.219,1.448 1.74,0.438 10 false 4 4.49,2.906 6.229,3.344 1.74,0.438 10 false 4 1.917,3.635 3.656,4.073 1.74,0.438 10 false 2 1.906,1.781 3.646,2.219 1.74,0.438 10 false 2 4.479,1.656 6.219,2.094 1.74,0.438 10 false 2 4.49,3.552 6.229,3.99 1.74,0.438 10 false 2 0.354,1.146 2.094,1.583 1.74,0.438 10 false K4 0.354,1.323 1.698,1.729 1.344,0.406 10 false Front No. 1 Speaker Assembly LH 0.365,3.146 1.708,3.552 1.344,0.406 10 false J3 0.375,3.323 1.719,3.729 1.344,0.406 10 false Front No. 1 Speaker Assembly RH 3,2.917 4.344,3.323 1.344,0.406 10 false + 2.99,1.042 4.333,1.448 1.344,0.406 10 false + 2.792,1.031 4.135,1.438 1.344,0.406 10 false 3 2.802,1.667 4.146,2.073 1.344,0.406 10 false 1 2.792,3.542 4.135,3.948 1.344,0.406 10 false 1 2.813,2.906 4.156,3.313 1.344,0.406 10 false 3 2.99,3.542 4.333,3.948 1.344,0.406 10 false - 3,1.688 4.344,2.094 1.344,0.406 10 false - 3.979,1.031 5.323,1.438 1.344,0.406 10 false TWL+ 4.021,1.677 5.365,2.083 1.344,0.406 10 false TWL- 3.979,2.906 5.323,3.313 1.344,0.406 10 false TWR+ 4.021,3.542 5.365,3.948 1.344,0.406 10 false TWR- 5.792,1.115 7.135,1.521 1.344,0.406 10 false FL+ 5.802,1.76 7.146,2.167 1.344,0.406 10 false FL- 5.802,3.01 7.146,3.417 1.344,0.406 10 false FR+ 5.802,3.635 7.146,4.042 1.344,0.406 10 false FR- 2.75,4.063 5.563,4.521 2.813,0.458 10 false J6 2.698,2.188 5.51,2.646 2.813,0.458 10 false K7 2.708,2.344 5.521,2.802 2.813,0.458 10 false Front No. 2 Speaker Assembly LH 2.75,4.219 5.563,4.677 2.813,0.458 10 false Front No. 2 Speaker Assembly RH 5.802,4.479 7.146,4.885 1.344,0.406 10 false RL+ 5.813,5.115 7.156,5.521 1.344,0.406 10 false RL- 5.802,5.729 7.146,6.135 1.344,0.406 10 false RR+ 5.781,6.354 7.125,6.76 1.344,0.406 10 false RR- 5.344,1.146 6.688,1.552 1.344,0.406 10 false G102 5.344,1.781 6.688,2.188 1.344,0.406 10 false G102 5.344,3.021 6.688,3.427 1.344,0.406 10 false G102 5.344,3.656 6.688,4.063 1.344,0.406 10 false G102 5.344,4.49 6.688,4.896 1.344,0.406 10 false G103 5.344,5.125 6.688,5.531 1.344,0.406 10 false G103 5.344,5.75 6.688,6.156 1.344,0.406 10 false G103 5.344,6.375 6.688,6.781 1.344,0.406 10 false G103 5.469,6.156 6.813,6.563 1.344,0.406 10 false 3 5.479,5.531 6.823,5.938 1.344,0.406 10 false 1 5.469,4.917 6.813,5.323 1.344,0.406 10 false 6 5.458,4.292 6.802,4.698 1.344,0.406 10 false 2 5.458,3.427 6.802,3.833 1.344,0.406 10 false 5 5.469,2.802 6.813,3.208 1.344,0.406 10 false 1 5.458,1.563 6.802,1.969 1.344,0.406 10 false 6 5.458,0.938 6.802,1.344 1.344,0.406 10 false 2

PROCEDURE

1.CHECK HARNESS AND CONNECTOR (SPEAKER CIRCUIT)

*1: for LH Side

*2: for RH Side


a.

Disconnect the G102 and G103 radio and display receiver assembly connectors.


b.

Disconnect the K4*1 and/or J3*2 front No. 1 speaker assembly connector.


c.

Disconnect the K7*1 and/or J6*2 front No. 2 speaker assembly connector.


d.

Disconnect the M2*1 and/or L2*2 rear speaker assembly connector.


e.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
for LH Side
Tester Connection Condition Specified Condition
G102-2 (FL+) - K7-4 (TWL+) Always Below 1 Ω
G102-6 (FL-) - K7-2 (TWL-) Always Below 1 Ω
K7-3 (+) - K4-1 Always Below 1 Ω
K7-1 (-) - K4-2 Always Below 1 Ω
G103-2 (RL+) - M2-1 Always Below 1 Ω
G103-6 (RL-) - M2-2 Always Below 1 Ω
G102-2 (FL+) or K7-4 (TWL+) - Body ground Always 10 kΩ or higher
G102-6 (FL-) or K7-2 (TWL-) - Body ground Always 10 kΩ or higher
K7-3 (+) or K4-1 - Body ground Always 10 kΩ or higher
K7-1 (-) or K4-2 - Body ground Always 10 kΩ or higher
G103-2 (RL+) or M2-1 - Body ground Always 10 kΩ or higher
G103-6 (RL-) or M2-2 - Body ground Always 10 kΩ or higher

for RH Side
Tester Connection Condition Specified Condition
G102-1 (FR+) - J6-4 (TWR+) Always Below 1 Ω
G102-5 (FR-) - J6-2 (TWR-) Always Below 1 Ω
J6-3 (+) - J3-1 Always Below 1 Ω
J6-1 (-) - J3-2 Always Below 1 Ω
G103-1 (RR+) - L2-1 Always Below 1 Ω
G103-3 (RR-) - L2-2 Always Below 1 Ω
G102-1 (FR+) or J6-4 (TWR+) - Body ground Always 10 kΩ or higher
G102-5 (FR-) or J6-2 (TWR-) - Body ground Always 10 kΩ or higher
J6-3 (+) or J3-1 - Body ground Always 10 kΩ or higher
J6-1 (-) or J3-2 - Body ground Always 10 kΩ or higher
G103-1 (RR+) or L2-1 - Body ground Always 10 kΩ or higher
G103-3 (RR-) or L2-2 - Body ground Always 10 kΩ or higher



Result:
Proceed to
OK
NG



OK

2.INSPECT FRONT NO. 1 SPEAKER ASSEMBLY

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

2.INSPECT FRONT NO. 1 SPEAKER ASSEMBLY
a.

Remove the front No. 1 speaker assembly.

Click hereAudio / Visual / Telematics>AUDIO / VIDEO>FRONT DOOR SPEAKER>REMOVAL


b.

Inspect the front No. 1 speaker assembly.

Click hereAudio / Visual / Telematics>AUDIO / VIDEO>FRONT DOOR SPEAKER>INSPECTION


Result:
Proceed to
OK
NG



OK

3.INSPECT REAR SPEAKER ASSEMBLY

NG

REPLACE FRONT NO. 1 SPEAKER ASSEMBLY

3.INSPECT REAR SPEAKER ASSEMBLY
a.

Remove the rear speaker assembly.

Click hereAudio / Visual / Telematics>AUDIO / VIDEO>REAR DOOR SPEAKER>REMOVAL


b.

Inspect the rear speaker assembly.

Click hereAudio / Visual / Telematics>AUDIO / VIDEO>REAR DOOR SPEAKER>INSPECTION


Result:
Proceed to
OK
NG



OK

4.CHECK FRONT NO. 2 SPEAKER ASSEMBLY

NG

4.CHECK FRONT NO. 2 SPEAKER ASSEMBLY
a.

Replace the front No. 2 speaker assembly.

Click hereAudio / Visual / Telematics>AUDIO / VIDEO>FRONT DOOR SPEAKER>REMOVAL


b.

Check the malfunction disappears.

OK:

Malfunction disappears.


HINT:
·

Connect all the connectors to the rear No. 2 speaker assemblies that were disconnected.

·

When there is a possibility that either the right or left front speaker is defective, inspect by interchanging the right one with the left one.

·

Perform the above inspection on both the LH and RH sides.




Result:
Proceed to
OK
NG



OK

END (FRONT NO. 2 SPEAKER ASSEMBLY IS DEFECTIVE)

NG