Home › Vehicle Interior › SUPPLEMENTAL RESTRAINT SYSTEMS › AIRBAG CUT-OFF INDICATOR LIGHT
RM33K0E _58 Vehicle Interior _043552 SUPPLEMENTAL RESTRAINT SYSTEMS _0219485 AIRBAG CUT-OFF INDICATOR LIGHT A

SUPPLEMENTAL RESTRAINT SYSTEMS  AIRBAG CUT-OFF INDICATOR LIGHT  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for RHD and LHD vehicles.

·

The procedure listed below is for LHD vehicles.



PROCEDURE

Hide 83950M 1.INSTALL TELLTALE LIGHT ASSEMBLY

a.
B409211C01
0.052,0.094 0.438,0.375 0.385,0.281 12 false *A 0.052,2.417 0.458,2.708 0.406,0.292 12 false *B
*A for Manual Air Conditioning System
*B for Automatic Air Conditioning System


Attach the 2 claws to install the telltale light assembly.


Hide 55909A 2.CONNECT AIR MIX DAMPER CONTROL CABLE SUB-ASSEMBLY (for Manual Air Conditioning System)

Hide 55906A 3.CONNECT DEFROSTER DAMPER CONTROL CABLE SUB-ASSEMBLY (for Manual Air Conditioning System)

Hide 84013A 4.INSTALL INTEGRATION PANEL SUB-ASSEMBLY (for Manual Air Conditioning System)

Hide 55900 5.INSTALL AIR CONDITIONING CONTROL ASSEMBLY (for Automatic Air Conditioning System)

Hide 55405B 6.INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY

Hide 55012A 7.INSTALL NO. 2 INSTRUMENT PANEL GARNISH SUB-ASSEMBLY

Hide 55011A 8.INSTALL NO. 1 INSTRUMENT PANEL GARNISH SUB-ASSEMBLY

Hide 55667 9.INSTALL INSTRUMENT PANEL REGISTER BEZEL GARNISH

Hide 10.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION