Home › Vehicle Interior › INTERIOR PANELS / TRIM › UPPER INSTRUMENT PANEL
RM33K0E _58 Vehicle Interior _043557 INTERIOR PANELS / TRIM _0227571 UPPER INSTRUMENT PANEL A

INTERIOR PANELS / TRIM  UPPER INSTRUMENT PANEL  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for RHD and LHD vehicles.

·

The procedure listed below is for LHD vehicles.

·

A bolt without a torque specification is shown in the standard bolt chart.

Click hereGeneral>SPECIFICATIONS>STANDARD BOLT>SPECIFIED TORQUE FOR STANDARD BOLTS



PROCEDURE

Hide 55302A 1.INSTALL UPPER INSTRUMENT PANEL SUB-ASSEMBLY

a.

Attach the guide to install the upper instrument panel sub-assembly.


b.

Attach the clip as shown in the illustration.

B437821C01
0,0 0,0 false
V113147

Install in this Direction - -



c.

Install the passenger airbag installation bolt <B>.

Torque:
16 N*m (163 kgf*cm, 12 ft.*lbf)


d.

Install the 2 clips <A>.


e.

Connect the connector and attach the clamp.

B437610C02
3.885,2.708 4.125,2.896 0.24,0.188 10 true *A 2.385,3.417 2.573,3.573 0.188,0.156 10 true *d 4.635,3.458 4.833,3.615 0.198,0.156 10 true *c 6.688,0.677 6.938,0.865 0.25,0.188 10 true *b 6.167,3.469 6.365,3.635 0.198,0.167 10 true *a 2.646,3.417 2.844,3.573 0.198,0.156 10 true *c 0.781,3.448 0.979,3.615 0.198,0.167 10 true *c 0.667,3.188 0.865,3.365 0.198,0.177 10 true *c 0.677,0.146 0.927,0.333 0.25,0.188 10 true *b
*A w/ Navigation System - -
*a Passenger Airbag Installation Bolt <B> *b Clip <A>
*c Connector *d Passenger Airbag Connector



f.
B341204C03
2.635,0.906 2.813,0.49 true 1.792,0.927 1.969,0.51 true 1.906,0.354 2.219,0.51 0.313,0.156 10 false *a 2.75,0.313 3.063,0.469 0.313,0.156 10 false *b
*a Lock Slider
*b Lock Position


Connect the passenger airbag connector.

NOTICE:

When handling the passenger airbag connector, take care not to damage the airbag wire harness.



g.

Check that the lock slider is in the lock position.


Hide 62212 2.INSTALL FRONT PILLAR GARNISH LH

a.
B437632C01
0,0 0,0 false
V113147

Install in this Direction (1)
V113148

Install in this Direction (2)


Attach the guide and clip to install the front pillar garnish LH as shown in the illustration.


b.
B437607C01
0.302,1.281 0.615,1.438 0.313,0.156 10 false *1
*1 Front Door Opening Trim Weatherstrip LH


Connect the front door opening trim weatherstrip LH in the range shown in the illustration.


Hide 62211 3.INSTALL FRONT PILLAR GARNISH RH

a.
B437631C01
0,0 0,0 false
V113147

Install in this Direction (1)
V113148

Install in this Direction (2)


Attach the guide and clip to install the front pillar garnish RH as shown in the illustration.


b.
B437820C01
2.833,1.156 3.146,1.313 0.313,0.156 10 false *1
*1 Front Door Opening Trim Weatherstrip RH


Connect the front door opening trim weatherstrip RH in the range shown in the illustration.


Hide 74603 4.INSTALL FRONT ASSIST GRIP SUB-ASSEMBLY

HINT:

Use the same procedure for both front assist grip sub-assemblies.


a.
B404470

Install the front assist grip sub-assembly with the 2 bolts.


b.
B404482

Attach the claw to close the assist grip covers.


Hide 55317A 5.INSTALL INSTRUMENT SIDE PANEL RH

a.

Connect the connector.


b.
B437637C01
0,0 0,0 false
V113147

Install in this Direction


Attach the guide and claw to install the instrument side panel RH as shown in the illustration.


c.
B437600C01
1.313,1.073 1.5,1.26 0.188,0.188 10 true *1
*1 Front Door Opening Trim Weatherstrip RH


Connect the front door opening trim weatherstrip RH in the range shown in the illustration.


Hide 62111C 6.INSTALL COWL SIDE TRIM BOARD RH

a.
B437638C01
0.292,0.719 0.521,0.875 0.229,0.156 10 true *a
*a Cap Nut
V113147

Install in this Direction


Attach the clip to install the cowl side trim board RH as shown in the illustration.


b.

Install the cap nut.


Hide 67913B 7.INSTALL FRONT DOOR SCUFF PLATE RH

Hide 55318C 8.INSTALL INSTRUMENT SIDE PANEL LH

a.
B437639C01
0,0 0,0 false
V113147

Install in this Direction


Attach the guide and claw to install the instrument side panel LH as shown in the illustration.


b.
B437596C01
1.667,1.073 1.875,1.229 0.208,0.156 10 true *1
*1 Front Door Opening Trim Weatherstrip LH


Connect the front door opening trim weatherstrip LH in the range shown in the illustration.


Hide 62112 9.INSTALL COWL SIDE TRIM BOARD LH

a.
B437640C01
2.667,0.719 2.917,0.875 0.25,0.156 10 true *a
*a Cap Nut
V113147

Install in this Direction


Attach the clip to install the cowl side trim board LH as shown in the illustration.


b.

Install the cap nut.


Hide 67914B 10.INSTALL FRONT DOOR SCUFF PLATE LH

Hide 55405B 11.INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY

a.
B437641C01
0,0 0,0 false
V113147

Install in this Direction


w/o Audio:

i.

Attach the clip to install the center instrument cluster finish panel sub-assembly as shown in the illustration.



b.
B437642C01
0,0 0,0 false
V113147

Install in this Direction


w/ Audio:

i.

Attach the clip to install the center instrument cluster finish panel sub-assembly as shown in the illustration.



Hide 55041B 12.INSTALL NO. 1 INSTRUMENT PANEL BOX DOOR SUB-ASSEMBLY

a.
B437643C01
0,0 0,0 false
V113147

Install in this Direction


Attach the clip to install the No. 1 instrument panel box door sub-assembly as shown in the illustration.


Hide 83100 13.INSTALL COMBINATION METER ASSEMBLY

Hide 55410C 14.INSTALL INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY

a.
B437644C01
0,0 0,0 false
V113147

Install in this Direction


Attach the clip to install the instrument cluster finish panel assembly as shown in the illustration.


Hide 55012A 15.INSTALL NO. 2 INSTRUMENT PANEL GARNISH SUB-ASSEMBLY

a.
B437645C01
0,0 0,0 false
V113147

Install in this Direction


Attach the clip to install the No. 2 instrument panel garnish sub-assembly as shown in the illustration.


Hide 55011A 16.INSTALL NO. 1 INSTRUMENT PANEL GARNISH SUB-ASSEMBLY

a.
B437646C01
0,0 0,0 false
V113147

Install in this Direction


Attach the clip to install the No. 1 instrument panel garnish sub-assembly as shown in the illustration.


Hide 55667 17.INSTALL INSTRUMENT PANEL REGISTER BEZEL GARNISH

a.
B437647C01
0,0 0,0 false
V113147

Install in this Direction


Attach the claw to install the instrument panel register bezel garnish as shown in the illustration.


Hide 45100 18.INSTALL STEERING WHEEL ASSEMBLY

Hide 19.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION