Use the same procedure for the RH and LH sides.
The procedure described below is for the LH side.
81590A
1.INSTALL REAR LIGHT ASSEMBLY LH
|
Install in this Direction |
Set the rear light assembly LH in place.
Install the 3 nuts.
Connect the connector.
84280D
2.INSTALL POWER BACK DOOR SENSOR ASSEMBLY LH (w/ Power Back Door)
67750
3.INSTALL BACK DOOR TRIM BOARD ASSEMBLY
74811D
4.INSTALL DOOR PULL HANDLE
67938A
5.INSTALL BACK DOOR SIDE GARNISH LH
67937B
6.INSTALL BACK DOOR SIDE GARNISH RH
67939B
7.INSTALL BACK DOOR CENTER GARNISH