Use the same procedure for the RH and LH sides.
The procedure described below is for the LH side.
67939B
1.REMOVE BACK DOOR CENTER GARNISH
67938A
2.REMOVE BACK DOOR SIDE GARNISH LH
67937B
3.REMOVE BACK DOOR SIDE GARNISH RH
74811D
4.REMOVE DOOR PULL HANDLE
67750
5.REMOVE BACK DOOR TRIM BOARD ASSEMBLY
84280D
6.REMOVE POWER BACK DOOR SENSOR ASSEMBLY LH (w/ Power Back Door)
81590A
7.REMOVE REAR LIGHT ASSEMBLY LH
|
Protective Tape |
Apply protective tape around the rear light assembly LH.
Disconnect the connector.
Remove the 3 nuts.
|
Remove in this Direction |
Pull the rear light assembly LH toward the rear of the vehicle to remove it.