1. RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM
16361A
2.REMOVE FAN AND GENERATOR V BELT
27415
3.REMOVE GENERATOR WITH CLUTCH PULLEY
for 80A Type: Click herePower Source / Network>1GD-FTV BATTERY / CHARGING>GENERATOR(for 80A Type)>REMOVAL
for 90A Type: Click herePower Source / Network>1GD-FTV BATTERY / CHARGING>GENERATOR(for 90A Type)>REMOVAL
for 100A Type: Click herePower Source / Network>2TR-FE BATTERY / CHARGING>GENERATOR(for 100A Type)>REMOVAL
4.REMOVE FRONT WHEEL LH
53737B
5.REMOVE FRONT FENDER APRON SEAL LH
Remove the 6 clips and front fender apron seal LH.
88711
6.DISCONNECT NO. 1 COOLER REFRIGERANT DISCHARGE HOSE
Remove the bolt and disconnect the No. 1 cooler refrigerant discharge hose from the compressor assembly with magnet clutch.
Remove the O-ring from the No. 1 cooler refrigerant discharge hose.
Seal the openings of the disconnected parts using vinyl tape to prevent moisture and foreign matter from entering them.
88704
7.DISCONNECT SUCTION HOSE SUB-ASSEMBLY
Remove the bolt and disconnect the suction hose sub-assembly from the compressor assembly with magnet clutch.
Remove the O-ring from the suction hose sub-assembly.
Seal the openings of the disconnected parts using vinyl tape to prevent moisture and foreign matter from entering them.
8.REMOVE COMPRESSOR ASSEMBLY WITH MAGNET CLUTCH
Disconnect the connector.
Detach the clamp.
|
Bolt |
|
Nut |
Remove the 2 bolts and 2 nuts.
Using an E8 "TORX" socket wrench, remove the 2 stud bolts and compressor assembly with magnet clutch.
Remove the compressor assembly with magnet clutch from the vehicle with the stud bolt remaining in the compressor assembly with magnet clutch.