Home › Vehicle Interior › HEATING / AIR CONDITIONING › COMPRESSOR(for 2TR-FE)
RM33K0E _58 Vehicle Interior _043555 HEATING / AIR CONDITIONING _0219891 COMPRESSOR(for 2TR-FE) A

HEATING / AIR CONDITIONING  COMPRESSOR(for 2TR-FE)  REMOVAL  


PROCEDURE

Hide 1. RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM

Hide 51410 2.REMOVE NO. 1 ENGINE UNDER COVER ASSEMBLY

Hide 16361A 4.REMOVE FAN AND GENERATOR V BELT

Hide 16572 6.REMOVE RADIATOR HOSE OUTLET

Hide 7.REMOVE FRONT WHEEL LH

Hide 53737B 8.REMOVE FRONT FENDER APRON SEAL LH

a.

Remove the 6 clips and front fender apron seal LH.


Hide 88711 9.DISCONNECT NO. 1 COOLER REFRIGERANT DISCHARGE HOSE

a.
E321422

Remove the bolt and disconnect the No. 1 cooler refrigerant discharge hose from the compressor assembly with magnet clutch.


b.

Remove the O-ring from the No. 1 cooler refrigerant discharge hose.

NOTICE:

Seal the openings of the disconnected parts using vinyl tape to prevent entry of moisture and foreign matter.



Hide 88704 10.DISCONNECT SUCTION HOSE SUB-ASSEMBLY

a.
E321423

Remove the bolt and disconnect the suction hose sub-assembly from the compressor assembly with magnet clutch.


b.

Remove the O-ring from the suction hose sub-assembly.

NOTICE:

Seal the openings of the disconnected parts using vinyl tape to prevent entry of moisture and foreign matter.



Hide 11.REMOVE COMPRESSOR ASSEMBLY WITH MAGNET CLUTCH

a.
E321424

Disconnect the connector.


b.

Detach the clamp.


c.
E321425C01
0,0 0,0 false
V100135

Bolt
V100136

Nut


Remove the 2 bolts and 2 nuts.


d.
E321426

Using an E8 "TORX" socket wrench, remove the 2 stud bolts and compressor assembly with magnet clutch.

HINT:

Remove the compressor assembly with magnet clutch from the vehicle with the stud bolt remaining in the compressor assembly with magnet clutch.