1.DISCHARGE FUEL SYSTEM PRESSURE
2. PRECAUTION
After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work.
Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION
3.DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
When disconnecting the cable, some systems need to be initialized after the cable is reconnected.
Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION
17129
4.REMOVE INTAKE AIR SURGE TANK
23802B
5.DISCONNECT NO. 2 FUEL PIPE SUB-ASSEMBLY
23280
6.REMOVE FUEL PRESSURE REGULATOR ASSEMBLY
Remove the 2 bolts and fuel pressure regulator assembly from the fuel delivery pipe sub-assembly.
Remove the O-ring from the fuel pressure regulator assembly.
Remove the vacuum hose from the fuel pressure regulator assembly.