16100
1.INSTALL ENGINE WATER PUMP ASSEMBLY
|
Bolt A |
|
Bolt B |
Install a new gasket and the engine water pump assembly to the timing chain cover sub-assembly with the 17 bolts.
16604
2.INSTALL NO. 2 IDLER PULLEY SUB-ASSEMBLY
w/ Idler Pulley Cover Plate:
Install the 2 idler pulley cover plates, 2 No. 2 idler pulleys and 2 No. 2 idler pulley cover plates with the 2 bolts.
w/o Idler Pulley Cover Plate:
Install the 2 No. 2 idler pulleys and 2 No. 2 idler pulley cover plates with the 2 bolts.
for Integrated Type:
Install the 2 No. 2 idler pulleys with the 2 bolts.
16620
3.INSTALL V-RIBBED BELT TENSIONER ASSEMBLY
4.INSTALL WATER INLET ASSEMBLY
Install a new O-ring to the water outlet pipe.
Install a new gasket to the engine water pump assembly.
Apply soapy water to the O-ring.
Install the water inlet assembly to the timing chain cover sub-assembly with the 5 bolts.
Connect the water by-pass hose, No. 2 water by-pass hose, No. 3 water by-pass hose, No. 4 water by-pass hose and No. 5 water by-pass hose to the water inlet assembly, and slide the 5 hose clamps to secure the hose.
Connect the radiator hose inlet and radiator hose outlet to the water inlet assembly, and slide the 2 hose clamps to secure the hose.
88320
5.CONNECT COOLER COMPRESSOR ASSEMBLY
27020
6.INSTALL GENERATOR ASSEMBLY
16711
7.INSTALL FAN SHROUD
8.ADD ENGINE COOLANT
9.INSPECT FOR COOLANT LEAK