Home › Engine / Hybrid System › 1GR-FE ENGINE CONTROL › POWER STEERING OIL PRESSURE SWITCH
RM33K0E _51 Engine / Hybrid System _043565 1GR-FE ENGINE CONTROL _0222023 POWER STEERING OIL PRESSURE SWITCH A

1GR-FE ENGINE CONTROL  POWER STEERING OIL PRESSURE SWITCH  INSTALLATION  


PROCEDURE

Hide 89438D 1.INSTALL POWER STEERING OIL PRESSURE SWITCH

a.

Apply a light coat of power steering fluid to the O-ring.

HINT:
·

When reusing the power steering oil pressure switch, inspect the O-ring.

·

If the O-ring has scratches or cuts, replace the power steering oil pressure switch.




b.

Using a wrench to hold union.


c.

Install the power steering oil pressure switch.

Torque:
20.6 N*m (210 kgf*cm, 15 ft.*lbf)


d.

Connect the power steering oil pressure switch connector.


Hide 2.ADD POWER STEERING FLUID

Hide 3.BLEED AIR FROM POWER STEERING SYSTEM

Hide 4.INSPECT FOR POWER STEERING FLUID LEAK