Home › Engine / Hybrid System › 1GD-FTV INTAKE / EXHAUST › EXHAUST MANIFOLD W/ TURBOCHARGER
RM33K0E _51 Engine / Hybrid System _043577 1GD-FTV INTAKE / EXHAUST _0222058 EXHAUST MANIFOLD W/ TURBOCHARGER A

1GD-FTV INTAKE / EXHAUST  EXHAUST MANIFOLD W/ TURBOCHARGER  REMOVAL  


CAUTION / NOTICE / HINT

The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed, installed, or replaced during the turbocharger sub-assembly removal/installation are shown below.

Necessary Procedure After Parts Removed/Installed/Replaced
Replacement Part or Procedure Necessary Procedures Effects/Inoperative when not Performed Link
·

Replacement of diesel throttle body assembly

·

Replacement of electric EGR control valve assembly

·

Replacement of turbocharger sub-assembly

·

Replacement of turbocharger sub-assembly or turbocharger variable nozzle motor


Perform initialization -
·

w/ DPF

(Click here)

·

w/o DPF

(Click here)



CAUTION:
·
A343692

To prevent burns, do not touch the engine, exhaust manifold or other high temperature components while the engine is hot.

·

To prevent burns, do not touch the engine, exhaust pipe or other high temperature components while the engine is hot.



PROCEDURE

Hide 51410 2.REMOVE NO. 1 ENGINE UNDER COVER ASSEMBLY

Hide 17362B 7.REMOVE NO. 2 AIR TUBE

Hide 16571C 8.REMOVE NO. 1 RADIATOR HOSE

Hide 44360 9.DISCONNECT VANE PUMP OIL RESERVOIR ASSEMBLY

Hide 44369A 10.REMOVE NO. 1 OIL RESERVOIR BRACKET

Hide 16470 11.REMOVE RADIATOR RESERVOIR

Hide 16711 12.REMOVE FAN SHROUD

Hide 17705 13.REMOVE AIR CLEANER CAP SUB-ASSEMBLY WITH AIR CLEANER HOSE

a.
A344947

Disconnect the mass air flow meter sub-assembly connector and detach the 2 harness clamps.


b.
A344948

Detach the 4 clips.


c.

Loosen the hose clamp and remove the air cleaner cap sub-assembly with air cleaner hose.


Hide 17801 14.REMOVE AIR CLEANER FILTER ELEMENT SUB-ASSEMBLY

a.
A345134

Remove the air cleaner element sub-assembly from the air cleaner case.


Hide 17701 15.REMOVE AIR CLEANER CASE SUB-ASSEMBLY

a.
A344949

Disconnect the 3 wire harness clamps.


b.
A344950

Remove the 3 bolts and air cleaner case sub-assembly.


Hide 16279 16.REMOVE NO. 3 WATER BY-PASS PIPE

a.
A344951

Slide the 2 clips and disconnect the 2 water hoses from the oil cooler assembly and No. 2 water by-pass pipe.


b.

Remove the bolt and No. 3 water by-pass pipe.


Hide 12261 17.REMOVE PCV HOSE

a.
A344952

Slide the 2 clips.


b.

Slide the 2 clips, detach the clamp and remove the PCV hose.


Hide 16268 18.REMOVE NO. 1 WATER BY-PASS PIPE

Hide 16284 19.DISCONNECT TURBO WATER HOSE

a.
A344953

Slide the 2 clips and disconnect the No. 1 turbo water hose and No. 2 turbo water hose from the water outlet sub-assembly and water pump assembly.


Hide 20.DISCONNECT BRACKET OIL COOLER TUBE BRACKET AND WIRE HARNESS CLAMP BRACKET (for Automatic Transmission)

a.
A353408

Remove the bolt and disconnect the oil cooler tube bracket.


b.
A360492

w/ DPF:

Detach the 2 clamps and disconnect the wire harness.


c.
A344954

w/o DPF:

Remove the bolt and disconnect the wire harness.


Hide 21.DISCONNECT WIRE HARNESS CLAMP BRACKET (for Manual Transmission)

a.
A360491

w/ DPF:

Remove the bolt, detach the clamp and disconnect the wire harness.


b.
A344954

w/o DPF:

Remove the bolt and disconnect the wire harness.


Hide 17293 22.REMOVE TURBOCHARGER STAY

a.
A344955

Remove the 3 bolts, nut and the turbocharger stay.


Hide 15474 23.REMOVE TURBO OIL OUTLET PIPE

a.
A344956

Slide the 2 clips and disconnect the turbo oil outlet hose from the turbo oil outlet pipe.


b.

Remove the 2 bolts and turbo oil outlet pipe and gasket.


Hide 15407 24.REMOVE TURBO OIL INLET PIPE SUB-ASSEMBLY

a.
A344957

Remove the union bolt and gasket.


b.
A344958

Remove the 2 nuts and the turbo oil inlet pipe sub-assembly.

NOTICE:
A344974E01
0.667,0.531 0.823,0.729 0.156,0.198 10 true A

Do not loosen the nut labeled A.



c.

Remove the gasket.


Hide 17201 25.REMOVE TURBOCHARGER SUB-ASSEMBLY

a.
A359577C01
0.052,0.031 0.365,0.188 0.313,0.156 10 true *A 0.083,2.292 0.396,2.448 0.313,0.156 10 false *B
*A w/ DPF
*B w/o DPF


Remove the 3 nuts and turbocharger sub-assembly.


b.

Remove the gasket from the exhaust manifold.


Hide 25601 26.REMOVE NO. 1 EGR PIPE SUB-ASSEMBLY

Hide 17141 27.REMOVE EXHAUST MANIFOLD

a.
A359578C01
0.083,0.094 0.396,0.25 0.313,0.156 10 true *A 0.094,2.354 0.406,2.51 0.313,0.156 10 false *B
*A w/ DPF
*B w/o DPF


Remove the 8 nuts, 8 plate washers, 8 collars and exhaust manifold.


b.

Remove the gasket.


Hide 16027 28.REMOVE NO. 1 TURBO WATER PIPE SUB-ASSEMBLY

a.
A359579C01
0.042,0.083 0.354,0.24 0.313,0.156 10 true *A 0.073,2.479 0.385,2.635 0.313,0.156 10 false *B
*A w/ DPF
*B w/o DPF


Slide the 2 hose clips and disconnect the No. 1 turbo water hose and No. 2 turbo water hose from the turbo water pipe sub-assembly.


b.

Remove the bolt.


c.
A344962

Remove the 2 nuts, turbo water pipe sub-assembly and gasket.


Hide 17274 29.REMOVE COMPRESSOR INLET ELBOW

a.
A344963

Remove the 2 bolts and compressor inlet elbow stay.


b.
A344964

Remove the 2 nuts and compressor inlet elbow from turbocharger sub-assembly.


c.
A344965

Using an E8 "TORX" socket wrench, remove the stud bolt shown in the illustration together with the compressor inlet elbow and gasket.


Hide 17275 30.REMOVE COMPRESSOR OUTLET ELBOW

a.
A344966

Remove the 2 nuts and compressor outlet elbow.


b.

Remove the gasket.


c.
A344967

Remove the bolt and hose clamp.


Hide 31.REMOVE STUD BOLT

NOTICE:

If a stud bolt is deformed or its threads are damaged, replace it.


a.
A344968

Using an E5 "TORX" socket wrench, remove the 4 stud bolts shown in the illustration.


b.
A344969

Using an E8 "TORX" socket wrench, remove the 4 stud bolts shown in the illustration.


c.
A344970

Using an E10 "TORX" socket wrench, remove the 3 stud bolts shown in the illustration.