89668A
1.INSTALL NO. 2 ECM BRACKET
Install the No. 2 ECM bracket with the 2 screws.
89667A
2.INSTALL NO. 1 ECM BRACKET
Install the No. 1 ECM bracket with the 2 screws.
89530C
3.INSTALL TRANSMISSION CONTROL ECU (for Automatic Transmission)
89533
4.INSTALL 4WD CONTROL ECU
89661
5.INSTALL ECM
Install the ECM, No. 1 and No. 2 ECM bracket with the bolt and 2 nuts.
Connect the 2 4WD control ECU connector and 4 ECM connectors.
for Automatic Transmission:
Connect the 2 transmission control ECU connector and 4 ECM connectors.
Attach the clamp.
89878
6.INSTALL TURBO MOTOR DRIVER
55510
7.INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY
8.PERFORM REGISTRATION
Click hereEngine / Hybrid System>1KD-FTV ENGINE CONTROL>ECD SYSTEM>REGISTRATION
Only perform registration when the ECM is replaced, either by itself or in any of the following combinations.
ECM and Fuel Supply Pump
ECM and Diesel Throttle Body Assembly
ECM and Injector Assembly
ECM and Engine Assembly
9.START ENGINE