Home › Vehicle Interior › INTERIOR PANELS / TRIM › LOWER INSTRUMENT PANEL
RM33K0E _58 Vehicle Interior _043557 INTERIOR PANELS / TRIM _0227572 LOWER INSTRUMENT PANEL A

INTERIOR PANELS / TRIM  LOWER INSTRUMENT PANEL  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for RHD and LHD vehicles.

·

The procedure listed below is for LHD vehicles.

·

A bolt without a torque specification is shown in the standard bolt chart.

Click hereGeneral>SPECIFICATIONS>STANDARD BOLT>SPECIFIED TORQUE FOR STANDARD BOLTS



PROCEDURE

Hide 55303B 1.INSTALL LOWER INSTRUMENT PANEL SUB-ASSEMBLY

a.
B437662

Connect the hood lock control cable and fuel lid lock open cable.


b.
B437661

Attach the guide and claw to connect the hood lock control lever sub-assembly and fuel lid lock open lever to the lower instrument panel sub-assembly.


c.

Connect the connector.


d.

Attach the guide to install the lower instrument panel sub-assembly.


e.

Install the 7 screws <B>, 2 bolts <C> and screw <D>.


f.

Attach the clamp and connect the illumination light.

B437660C02
4.813,1.563 4.979,1.719 0.167,0.156 10 true *f 0.229,1.313 0.542,1.469 0.313,0.156 10 false *b 0.646,2.521 0.844,2.677 0.198,0.156 10 false *c 4.323,2.219 4.531,2.396 0.208,0.177 10 true *d 6.563,1.198 6.729,1.354 0.167,0.156 10 true *a 1.479,1.667 1.667,1.823 0.188,0.156 10 true *b 2.281,2.833 2.469,2.99 0.188,0.156 10 true *b 3.948,3.115 4.135,3.271 0.188,0.156 10 true *b 6.417,3.146 6.625,3.302 0.208,0.156 10 true *c 6.833,1.698 7.021,1.854 0.188,0.156 10 true *b 5.333,1.094 5.521,1.25 0.188,0.156 10 true *b 4.385,1.073 4.573,1.229 0.188,0.156 10 true *b 4.083,1.26 4.292,1.417 0.208,0.156 10 true *e 5.375,1.75 5.583,1.906 0.208,0.156 10 true *e 0.563,0.979 0.729,1.135 0.167,0.156 10 true *a
*a Guide *b Screw <B>
*c Bolt <C> *d Screw <D>
*e Clamp *f Illumination Light



Hide 55054 2.INSTALL GLOVE COMPARTMENT DOOR STOPPER SUB-ASSEMBLY

a.
B437659

Attach the claw to install the glove compartment door stopper sub-assembly.


Hide 55550 3.INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY

a.
B437675

Attach the hinge to install the glove compartment door assembly.


b.
B437657

Attach the claw to connect the glove compartment door stopper sub-assembly.


c.
B437676C01
0,0 0,0 false
V113147

Install in this Direction


Install the glove door stopper pin and twist it as shown in the illustration.

HINT:

Use the same procedure for both glove door stopper pins.



Hide 55607 4.INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

a.
B437677C01
0,0 0,0 false
V113147

Install in this Direction


Attach the guide.


b.

Attach the claw to install the No. 2 instrument panel under cover sub-assembly as shown in the illustration.


Hide 73900 5.INSTALL LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY

Hide 55606 6.INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

a.

Attach the claw to connect the DLC3.


b.
B437678C01
0.354,1.313 0.573,1.469 0.219,0.156 10 true *a 2.156,1.594 2.375,1.75 0.219,0.156 10 true *a
*a Screw <A>
V113147

Install in this Direction


Attach the guide and clip to install the No. 1 instrument panel under cover sub-assembly as shown in the illustration.


c.

Install the 2 screws <A>.


Hide 55447C 7.INSTALL NO. 2 SWITCH HOLE BASE

a.

w/ Entry and Start System:

i.
B438073C01
0,0 0,0 false
V113147

Install in this Direction


Connect the connector.


ii.

for Automatic Air Conditioning System:

Connect the cooler thermistor connector and hose.


iii.

Attach the clip to install the No. 2 switch hole base as shown in the illustration.



b.

w/o Entry and Start System:

i.
B437679C01
0,0 0,0 false
V113147

Install in this Direction


Attach the clip to install the No. 2 switch hole base as shown in the illustration.



Hide 55407C 8.INSTALL LOWER INSTRUMENT COVER SUB-ASSEMBLY

a.
B437680C01
0,0 0,0 false
V113147

Install in this Direction


except 4WD:

i.

Connect the connector.


ii.

Attach the clip to install the lower instrument cover sub-assembly as shown in the illustration.



b.
B437681C01
0,0 0,0 false
V113147

Install in this Direction


for 4WD:

i.

Connect the connector.


ii.

Attach the clip to install the lower instrument cover sub-assembly as shown in the illustration.



Hide 84013A 9.INSTALL INTEGRATION PANEL SUB-ASSEMBLY (for Manual Air Conditioning System)

Hide 55905J 10.INSTALL CONTROL KNOB SUB-ASSEMBLY (for Manual Air Conditioning System)

Hide 55900 11.INSTALL AIR CONDITIONING CONTROL ASSEMBLY (for Automatic Air Conditioning System)

Hide 55522B 12.INSTALL RADIO TUNER OPENING COVER (w/o Audio)

a.
B438096

Install the radio tuner opening cover with the 4 screws.


Hide 86120 13.INSTALL RADIO RECEIVER ASSEMBLY (w/ Audio, for Radio Receiver Type)

Hide 86140A 14.INSTALL RADIO AND DISPLAY RECEIVER ASSEMBLY (w/ Audio, for Radio and Display Type)

Hide 86120L 15.INSTALL NAVIGATION RECEIVER ASSEMBLY (w/ Navigation System)

Hide 84140 16.INSTALL HEADLIGHT DIMMER SWITCH ASSEMBLY

Hide 58810J 17.INSTALL CONSOLE BOX ASSEMBLY

Hide 55302A 18.INSTALL UPPER INSTRUMENT PANEL SUB-ASSEMBLY

Hide 19.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION