Home › Brake › BRAKE (REAR) › REAR BRAKE FLEXIBLE HOSE(for Rear Disc Brake)
RM33K0E _54 Brake _043536 BRAKE (REAR) _0223439 REAR BRAKE FLEXIBLE HOSE(for Rear Disc Brake) A

BRAKE (REAR)  REAR BRAKE FLEXIBLE HOSE(for Rear Disc Brake)  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 47355A 1.INSTALL NO. 5 FLEXIBLE HOSE BRACKET

a.

Install the No. 5 flexible hose bracket with the bolt.

Torque:
29 N*m (296 kgf*cm, 21 ft.*lbf)


Hide 47356 2.INSTALL NO. 6 FLEXIBLE HOSE BRACKET

a.

Install the No. 6 flexible hose bracket with the bolt.

Torque:
29 N*m (296 kgf*cm, 21 ft.*lbf)


Hide 47321B 3.INSTALL REAR BRAKE TUBE FLEXIBLE HOSE

a.

Connect the rear brake tube flexible hose to the connecting point with each brake tube, and then install 2 new clips.


b.
A329093C03
1.719,0.542 2.031,0.698 0.313,0.156 10 false *a
*a Torque Wrench Fulcrum Length


Using a union nut wrench, connect the rear brake tube flexible hose to the brake tube while holding the rear brake tube flexible hose with a wrench.

Torque:
Specified tightening torque : 15.2 N*m (155 kgf*cm, 11 ft.*lbf)

HINT:
·

Calculate the torque wrench reading when changing the fulcrum length of the torque wrench.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION

·

When using a union nut wrench (fulcrum length of 22 mm (0.8661 in.)) + torque wrench (fulcrum length of 162 mm (6.3779 in.)): 13.4 N*m (137 kgf*cm, 10 ft.*lbf)



NOTICE:
·

Do not bend or damage the brake tube.

·

Do not allow any foreign matter such as dirt and dust to enter the brake tube from the connecting point.




c.

Connect the flexible hose to the connecting point with each brake tube, and then install 2 new clips.


d.
A329093C03
1.719,0.542 2.031,0.698 0.313,0.156 10 false *a
*a Torque Wrench Fulcrum Length


Using a union nut wrench, connect each brake tube to the flexible hose while holding the flexible hose with a wrench.

Torque:
Specified tightening torque : 15.2 N*m (155 kgf*cm, 11 ft.*lbf)

HINT:
·

Calculate the torque wrench reading when changing the fulcrum length of the torque wrench.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION

·

When using a union nut wrench (fulcrum length of 22 mm (0.8661 in.)) + torque wrench (fulcrum length of 162 mm (6.3779 in.)): 13.4 N*m (137 kgf*cm, 10 ft.*lbf)



NOTICE:
·

Do not bend or damage the brake tube.

·

Do not allow any foreign matter such as dirt and dust to enter the brake tube from the connecting point.




Hide 47319F 4.INSTALL REAR FLEXIBLE HOSE LH

a.

Connect the rear flexible hose to the connecting point with the brake tube, and then install a new clip.


b.
A329093C03
1.719,0.542 2.031,0.698 0.313,0.156 10 false *a
*a Torque Wrench Fulcrum Length


Using a union nut wrench, connect the brake tube to the rear flexible hose while holding the rear flexible hose with a wrench.

Torque:
Specified tightening torque : 15.2 N*m (155 kgf*cm, 11 ft.*lbf)

HINT:
·

Calculate the torque wrench reading when changing the fulcrum length of the torque wrench.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION

·

When using a union nut wrench (fulcrum length of 22 mm (0.8661 in.)) + torque wrench (fulcrum length of 162 mm (6.3779 in.)): 13.4 N*m (137 kgf*cm, 10 ft.*lbf)



NOTICE:
·

Do not bend or damage the brake tube.

·

Do not allow any foreign matter such as dirt and dust to enter the brake tube from the connecting point.




c.

Install the rear flexible hose LH and a new gasket to the rear disc brake cylinder assembly LH with the new union bolt.

Torque:
31 N*m (316 kgf*cm, 23 ft.*lbf)


Hide 5.BLEED BRAKE LINE (w/ VSC)

Hide 6.BLEED BRAKE LINE (w/o VSC)

Hide 7.BLEED CLUTCH LINE (for Manual Transmission)