Home › Engine / Hybrid System › 1KD-FTV ENGINE MECHANICAL › REAR CRANKSHAFT OIL SEAL
RM33K0E _51 Engine / Hybrid System _043569 1KD-FTV ENGINE MECHANICAL _0225046 REAR CRANKSHAFT OIL SEAL A

1KD-FTV ENGINE MECHANICAL  REAR CRANKSHAFT OIL SEAL  INSTALLATION  


PROCEDURE

Hide 11381A 1.INSTALL REAR ENGINE OIL SEAL

a.

Apply MP grease to the lip of a new rear engine oil seal.

NOTICE:
·

Keep the lip free of foreign matter.

·

Do not allow MP grease to contact the dust seal.




b.
A352055N01
1.75,1.188 1,1.74 1,1.74 0.792,1.74 true 1.969,1.188 2.594,0.844 2.594,0.844 2.75,0.844 true 0.49,1.635 0.823,1.802 0.333,0.167 10 false SST 2.781,0.74 3.115,0.906 0.333,0.167 10 false SST

Using SST and a hammer, tap in the rear engine oil seal to the rear engine oil seal retainer edge.

SST
09518-36030  
09950-70010  (09951-07200)

NOTICE:
·

The acceptable depth from the top of the rear engine oil seal retainer is 0 to 0.8 mm (0 to 0.0315 in.)

·

Keep the lip free from foreign matter.

·

Do not tap the rear engine oil seal at an angle.

·

Make sure that the engine rear oil seal is properly installed.




Hide 31250 4.INSTALL CLUTCH DISC ASSEMBLY (for Manual Transmission)

Hide 31210 5.INSTALL CLUTCH COVER ASSEMBLY (for Manual Transmission)

Hide 31210 6.INSPECT AND ADJUST CLUTCH COVER ASSEMBLY (for Manual Transmission)

Hide 33030 7.INSTALL MANUAL TRANSMISSION UNIT ASSEMBLY (for Manual Transmission)

Hide 8.INSTALL AUTOMATIC TRANSMISSION ASSEMBLY (for Automatic Transmission)