Home › Engine / Hybrid System › 2TR-FE ENGINE MECHANICAL › FRONT CRANKSHAFT OIL SEAL
RM33K0E _51 Engine / Hybrid System _043570 2TR-FE ENGINE MECHANICAL _0225065 FRONT CRANKSHAFT OIL SEAL A

2TR-FE ENGINE MECHANICAL  FRONT CRANKSHAFT OIL SEAL  REMOVAL  


PROCEDURE

Hide 16711 1.REMOVE FAN SHROUD

Hide 13471 2.REMOVE CRANKSHAFT PULLEY

Hide 11303A 3.REMOVE TIMING CHAIN CASE OIL SEAL

a.
A346809C01
0.573,1.646 0.781,1.646 0.781,1.646 1.583,1.323 true 0.385,1.531 0.573,1.729 0.188,0.198 10 false *a
*a Protective Tape


Using a screwdriver, pry out the timing chain case oil seal.

NOTICE:
·

Do not damage the surface of the timing chain case oil seal press fit hole or the crankshaft.

·

Check the crankshaft for damage after removing the timing chain case oil seal. If the crankshaft is damaged, smooth the surface with 400-grit sandpaper.



HINT:

Tape the screwdriver tip before use.