Home › Drivetrain › AXLE AND DIFFERENTIAL › REAR AXLE HUB BOLT
RM33K0E _52 Drivetrain _043595 AXLE AND DIFFERENTIAL _0226843 REAR AXLE HUB BOLT A

AXLE AND DIFFERENTIAL  REAR AXLE HUB BOLT  REPLACEMENT  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 1.REMOVE REAR WHEEL

Hide 42403 2.REMOVE REAR BRAKE DRUM SUB-ASSEMBLY (for Rear Drum Brake)

Hide 3.REMOVE PARKING BRAKE ASSEMBLY (for Rear Disc Brake)

Hide 42312E 4.REMOVE REAR AXLE HUB BOLT

a.
C330125C01
1.615,3.865 1.021,4.188 1.021,4.188 1.635,3.563 true 1.625,1.396 1.031,1.719 1.031,1.719 1.646,1.094 true 2.438,0.865 2.646,0.573 2.646,0.573 2.896,0.573 true 2.375,3.292 2.583,3 2.583,3 2.833,3 true 2.958,1.5 3.271,1.698 0.313,0.198 10 false *a 1.26,1.885 1.573,2.083 0.313,0.198 10 false *b 2.958,3.979 3.271,4.177 0.313,0.198 10 false *a 1.26,4.313 1.573,4.51 0.313,0.198 10 false *b 0.844,4.104 1.156,4.302 0.313,0.198 10 false *c 0.844,1.646 1.156,1.844 0.313,0.198 10 false *c 2.958,0.5 3.396,0.698 0.438,0.198 10 false SST 2.896,2.917 3.333,3.115 0.438,0.198 10 false SST 0.135,0.052 0.448,0.25 0.313,0.198 10 true *A 0.125,2.542 0.438,2.74 0.313,0.198 10 true *B
*A for Rear Drum Brake
*B for Rear Disc Brake
*a Turn
*b Hold
*c Nut


Temporarily install 2 nuts to the 2 rear axle hub bolts as shown in the illustration.


b.

Using SST and a brass bar or equivalent to hold the rear axle shaft, remove the rear axle hub bolt.

SST
09650-17011  


Hide 42312E 5.INSTALL REAR AXLE HUB BOLT

a.
C330126C01
2.146,2.604 2.313,2.604 2.313,2.604 2.729,2.854 true 3.083,3.802 2.938,3.802 2.938,3.802 2.854,3.302 true 2.167,0.188 2.333,0.188 2.333,0.188 2.75,0.438 true 3.094,1.333 2.948,1.333 2.948,1.333 2.865,0.833 true 1.156,1.073 0.573,1.688 0.573,1.688 1.177,1.417 true 1.115,3.521 0.531,4.135 0.531,4.135 1.135,3.865 true 2.167,3.75 2.479,3.948 0.313,0.198 10 false *a 0.74,4.302 1.052,4.5 0.313,0.198 10 false *b 1.958,2.521 2.271,2.719 0.313,0.198 10 false *c 3.146,3.719 3.406,3.917 0.26,0.198 10 false *d 2.146,1.344 2.458,1.542 0.313,0.198 10 false *a 0.771,1.865 1.083,2.063 0.313,0.198 10 false *b 1.99,0.094 2.302,0.292 0.313,0.198 10 false *c 3.146,1.25 3.406,1.448 0.26,0.198 10 false *d 0.104,0.083 0.417,0.281 0.313,0.198 10 true *A 0.104,2.563 0.417,2.76 0.313,0.198 10 true *B 0.333,1.625 0.594,1.823 0.26,0.198 10 false *d 0.344,4.063 0.604,4.26 0.26,0.198 10 false *d
*A for Rear Drum Brake
*B for Rear Disc Brake
*a Turn
*b Hold
*c Plate Washer
*d Nut


Install a plate washer and nut to a new rear axle hub bolt as shown in the illustration.


b.

Using a brass bar or equivalent to hold the rear axle shaft, install the rear axle hub bolt by tightening the nut.


c.

Remove the 2 nuts from the 2 rear axle hub bolts.


Hide 6.INSTALL PARKING BRAKE ASSEMBLY (for Rear Disc Brake)

Hide 42403 7.INSTALL REAR BRAKE DRUM SUB-ASSEMBLY (for Rear Drum Brake)