52563A
1.INSTALL REAR BUMPER UPPER RETAINER LH
Install the rear bumper upper retainer LH with the screw.
52562B
2.INSTALL REAR BUMPER UPPER RETAINER RH
Use the same procedure described for the LH side.
52576
3.INSTALL REAR BUMPER SIDE RETAINER LH
|
Install in this Direction |
Attach the claw to install the rear bumper side retainer LH as shown in the illustration.
Install the 3 clips.
52575
4.INSTALL REAR BUMPER SIDE RETAINER RH
Use the same procedure described for the LH side.
52346
5.INSTALL REAR BACK STEP FRAME
Install the rear back step frame with the 6 bolts.
52151G
6.INSTALL REAR BUMPER EXTENSION
Install the rear bumper extension with the bolt.
Use the same procedure for all rear bumper extensions.
Attach the clamp.
7.INSTALL REAR BODY NO. 2 MUDGUARD SUPPORT RH
Install the rear body No. 2 mudguard support RH with 3 new grommets.
Install the screw.
8.INSTALL REAR BODY NO. 2 MUDGUARD SUPPORT LH
Install the rear body No. 2 mudguard support LH with 3 new grommets.
Install the screw.
76648
9.INSTALL REAR BODY NO. 1 MUDGUARD SUPPORT RH
Install the rear body No. 1 mudguard support RH with the 2 screws.
76648C
10.INSTALL REAR BODY NO. 1 MUDGUARD SUPPORT LH
Install the rear body No. 1 mudguard support LH with the 2 screws.
52159
11.INSTALL REAR BUMPER COVER
Connect the No. 3 luggage room wire connector.
|
Install in this Direction |
Install the rear bumper cover as shown in the illustration.
|
Install in this Direction |
Attach the claw as shown in the illustration.
Use the same procedure to detach the claw on the other side.
Install the 8 screws.
Install the 3 clips.
Install the 4 screws.
Install the screw.
Use the same procedure for the other side.
76626E
12.INSTALL REAR QUARTER PANEL MUDGUARD LH (w/ Mudguard)
76625G
13.INSTALL REAR QUARTER PANEL MUDGUARD RH (w/ Mudguard)
Use the same procedure described for the LH side.
81560
14.INSTALL REAR COMBINATION LIGHT ASSEMBLY LH
81550
15.INSTALL REAR COMBINATION LIGHT ASSEMBLY RH
Use the same procedure described for the LH side.