Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › REAR SPOILER
RM33K0E _59 Vehicle Exterior _043564 EXTERIOR PANELS / TRIM _0227150 REAR SPOILER A

EXTERIOR PANELS / TRIM  REAR SPOILER  INSTALLATION  


PROCEDURE

Hide 76085 1.INSTALL REAR SPOILER SUB-ASSEMBLY

a.
B400257

Attach the clip to install the rear spoiler sub-assembly.


b.

Install the 5 bolts.

Torque:
7.8 N*m (80 kgf*cm, 69 in.*lbf)


c.

Remove the protective tape.


Hide 64886B 2.INSTALL BACK DOOR GLASS CHANNEL LH

HINT:

When installing the back door glass channel LH, heat the vehicle body and back door glass channel LH using a heat light.


Standard:
Item Temperature
Vehicle Body 40 to 60°C (104 to 140°F)
Back Door Glass Channel LH 20 to 30°C (68 to 86°F)


CAUTION:
E306500C23
2.365,2 2.698,2 false 0.5,2.333 0.5,2.667 true 0.427,2.708 0.74,2.865 0.313,0.156 10 false *a 2.76,1.927 3.073,2.083 0.313,0.156 10 false *b
*a Heated Part
*b Heat Light


·

Do not touch the heat light and heated parts.

·

Touching the heat light may result in burns.

·

Touching heated parts for a long time may result in burns.



a.

Clean the vehicle body surface.

i.

Using a heat light, heat the vehicle body surface.


ii.

Remove the double-sided tape from the vehicle body.


iii.

Wipe off any tape adhesive residue with cleaner.



b.

Install a new back door glass channel LH.

i.

Using a heat light, heat the vehicle body and a new back door glass channel LH.


ii.

Remove the peeling paper from the face of the back door glass channel LH.

HINT:

After removing the peeling paper, keep the exposed adhesive free from foreign matter.



iii.

Attach the clip to install the back door glass channel LH.

HINT:

Press the back door glass channel LH firmly to install it.




Hide 64885C 3.INSTALL BACK DOOR GLASS CHANNEL RH

HINT:

Use the same procedure described for the LH side.


Hide 67939B 4.INSTALL CENTER BACK DOOR GARNISH