Home › Vehicle Interior › HEATING / AIR CONDITIONING › AIR CONDITIONING SYSTEM(for Automatic Air Conditioning System)
RM33K0E _58 Vehicle Interior _043555 HEATING / AIR CONDITIONING _0227347 AIR CONDITIONING SYSTEM(for Automatic Air Conditioning System) C

HEATING / AIR CONDITIONING  AIR CONDITIONING SYSTEM(for Automatic Air Conditioning System)  B1442/42  Air Inlet Damper Control Servo Motor Circuit  


DESCRIPTION

The No. 1 blower damper servo sub-assembly sends pulse signals to inform the air conditioning amplifier assembly of the damper position. The air conditioning amplifier assembly activates the motor (normal, reverse) based on the signals to move the No. 1 blower damper servo sub-assembly to any position, which controls the intake air settings (FRESH, FRESH/RECIRCULATION, and RECIRCULATION).

DTC No. Detection Item DTC Detection Condition Trouble Area Memory Note
B1442/42 Air Inlet Damper Control Servo Motor Circuit Air inlet damper position sensor value does not change even if air conditioning amplifier assembly operates No. 1 blower damper servo sub-assembly
·

No. 1 blower damper servo sub-assembly

·

No. 1 air conditioning radiator damper servo sub-assembly

·

Air conditioning harness assembly

·

Air conditioning amplifier assembly


Memorized (30 seconds or more) -

HINT:

The air conditioning amplifier assembly stores the DTC of the respective malfunction if it has occurred for the period of time indicated in the parentheses.


WIRING DIAGRAM

E315726E03
5.042,0.708 5.813,0.906 0.771,0.198 10 false BUS 5.031,1.094 5.802,1.292 0.771,0.198 10 false BBUS 5.052,1.49 5.823,1.688 0.771,0.198 10 false BUSG 4.76,0.677 5.01,0.875 0.25,0.198 10 false 3 4.76,1.104 5.01,1.302 0.25,0.198 10 false 4 4.771,1.479 5.021,1.677 0.25,0.198 10 false 2 0.667,1.219 1.938,1.417 1.271,0.198 10 false Front Side Air Mix 1.063,2.583 2.333,2.781 1.271,0.198 10 false Front Mode 0.771,4.031 2.688,4.698 1.917,0.667 10 false No. 1 Air Conditioning Radiator Damper Servo Sub-assembly 0.875,6.604 2.573,7.104 1.698,0.5 10 false No. 1 Blower Damper Servo Sub-assembly 3.156,6.458 4.698,6.896 1.542,0.438 10 false Air Conditioning Harness Assembly 4.781,7.208 5.552,7.406 0.771,0.198 10 false f1 4.76,7.385 7.031,7.635 2.271,0.25 10 false Air Conditioning Amplifier Assembly 0.885,8.333 3.26,8.594 2.375,0.26 10 false : LIN Communication Line 1.01,5.583 2.281,5.781 1.271,0.198 10 false Recirculation 6.031,0.865 6.802,1.063 0.771,0.198 10 false IC 6.354,0.938 7.125,1.135 0.771,0.198 10 false +B 3.375,0.698 4.146,0.896 0.771,0.198 10 false BUS 3.385,1.104 4.156,1.302 0.771,0.198 10 false BBUS 3.385,1.49 4.156,1.688 0.771,0.198 10 false BUSG 3.385,1.865 4.156,2.063 0.771,0.198 10 false M+ 3.385,2.26 4.156,2.458 0.771,0.198 10 false M- 3.344,3.427 4.115,3.625 0.771,0.198 10 false GND 3.375,3.031 4.146,3.229 0.771,0.198 10 false STE2 3.375,2.646 4.146,2.844 0.771,0.198 10 false STE1

CAUTION / NOTICE / HINT

NOTICE:
·

When DTC B1441/41, B1442/42 and B1443/43 are output at same time, the No. 1 air conditioning radiator damper servo sub-assembly is malfunctioning.

·

When the servo motor or air conditioning amplifier assembly is replaced, be sure to perform servo motor initialization.

Click hereVehicle Interior>HEATING / AIR CONDITIONING>AIR CONDITIONING SYSTEM(for Automatic Air Conditioning System)>INITIALIZATION



HINT:

Confirm that no mechanical problem is present, because this DTC code can be output when either a damper link or the damper is mechanically locked.


PROCEDURE

1.READ VALUE USING GTS (AIR INLET DAMPER TARG PULSE, AIR INLET DAMPER ACTUAL PULSE)
a.

Connect the GTS to the DLC3.


b.

Turn the ignition switch to ON.


c.

Turn the GTS on.


d.

Operate the recirculation/fresh switch.


e.

Enter the following menus: Body Electrical / Air Conditioner / Data List.


f.

Check the value(s) by referring to the table below.

Body Electrical > Air Conditioner > Data List
Tester Display Measurement Item Range Normal Condition Diagnostic Note
Air Inlet Damper Targ Pulse No. 1 blower damper servo sub-assembly (recirculation) target pulse Min.: 128
Max.: 383
Recirculation: 258 (pulse)
Fresh: 235 (pulse)
No. 1 blower damper servo sub-assembly (recirculation) system malfunction
Air Inlet Damper Actual Pulse No. 1 blower damper servo sub-assembly (recirculation) actual pulse Min.: 128
Max.: 383
Recirculation: 258 (pulse)
Fresh: 235 (pulse)
No. 1 blower damper servo sub-assembly (recirculation) system malfunction
Body Electrical > Air Conditioner > Data List
Tester Display
Air Inlet Damper Targ Pulse
Air Inlet Damper Actual Pulse
50003 121 73,131
OK:

When the recirculation/fresh switch is turned to recirculation mode or fresh mode, the actual pulse changes following the target pulse.



Result:
Result Proceed to
Target pulse and actual pulse do not change A
Target pulse changes but actual pulse does not change B
Actual pulse changes following the target pulse (When troubleshooting according to the DTC) C
Actual pulse changes following the target pulse (When troubleshooting according to Problem Symptoms Table) D



A

REPLACE AIR CONDITIONING AMPLIFIER ASSEMBLY

B

2.CHECK NO. 1 BLOWER DAMPER SERVO SUB-ASSEMBLY

C

5.CHECK FOR DTC

D

2.CHECK NO. 1 BLOWER DAMPER SERVO SUB-ASSEMBLY
a.

Replace the No. 1 blower damper servo sub-assembly.

Click hereVehicle Interior>HEATING / AIR CONDITIONING>BLOWER UNIT>DISASSEMBLY

HINT:

Since the servo motor cannot be inspected while it is removed from the vehicle, replace the servo motor with a new or known good one and check that the condition returns to normal.



b.

Clear the DTCs.

Click hereVehicle Interior>HEATING / AIR CONDITIONING>AIR CONDITIONING SYSTEM(for Automatic Air Conditioning System)>DTC CHECK / CLEAR

Body Electrical > Air Conditioner > Clear DTCs
50002 121

c.

Check for DTCs.

Click hereVehicle Interior>HEATING / AIR CONDITIONING>AIR CONDITIONING SYSTEM(for Automatic Air Conditioning System)>DTC CHECK / CLEAR

Body Electrical > Air Conditioner > Trouble Codes
50001 121
OK:

DTC B1442/42 is not output



Result:
Proceed to
OK
NG



OK

END (NO. 1 BLOWER DAMPER SERVO SUB-ASSEMBLY IS DEFECTIVE)

NG

3.CHECK NO. 1 AIR CONDITIONING RADIATOR DAMPER SERVO SUB-ASSEMBLY
3.CHECK NO. 1 AIR CONDITIONING RADIATOR DAMPER SERVO SUB-ASSEMBLY
a.

Replace the No. 1 air conditioning radiator damper servo sub-assembly.

Click hereVehicle Interior>HEATING / AIR CONDITIONING>FRONT AIR CONDITIONING UNIT>DISASSEMBLY

HINT:

Since the servo motor cannot be inspected while it is removed from the vehicle, replace the servo motor with a new or known good one and check that the condition returns to normal.



b.

Clear the DTCs.

Click hereVehicle Interior>HEATING / AIR CONDITIONING>AIR CONDITIONING SYSTEM(for Automatic Air Conditioning System)>DTC CHECK / CLEAR

Body Electrical > Air Conditioner > Clear DTCs
50002 121

c.

Check for DTCs.

Click hereVehicle Interior>HEATING / AIR CONDITIONING>AIR CONDITIONING SYSTEM(for Automatic Air Conditioning System)>DTC CHECK / CLEAR

Body Electrical > Air Conditioner > Trouble Codes
50001 121
OK:

DTC B1442/42 is not output



Result:
Proceed to
OK
NG



OK

END (NO. 1 AIR CONDITIONING RADIATOR DAMPER SERVO SUB-ASSEMBLY IS DEFECTIVE)

NG

4.CHECK AIR CONDITIONING HARNESS ASSEMBLY
4.CHECK AIR CONDITIONING HARNESS ASSEMBLY
a.

Replace the air conditioning harness assembly.

Click hereVehicle Interior>HEATING / AIR CONDITIONING>FRONT AIR CONDITIONING UNIT>DISASSEMBLY

HINT:

Since the air conditioning harness assembly cannot be inspected while it is removed from the vehicle, replace the air conditioning harness assembly with a new or known good one and check that the condition returns to normal.



b.

Clear the DTCs.

Click hereVehicle Interior>HEATING / AIR CONDITIONING>AIR CONDITIONING SYSTEM(for Automatic Air Conditioning System)>DTC CHECK / CLEAR

Body Electrical > Air Conditioner > Clear DTCs
50002 121

c.

Check for DTCs.

Click hereVehicle Interior>HEATING / AIR CONDITIONING>AIR CONDITIONING SYSTEM(for Automatic Air Conditioning System)>DTC CHECK / CLEAR

Body Electrical > Air Conditioner > Trouble Codes
50001 121
OK:

DTC B1442/42 is not output



Result:
Proceed to
OK
NG



OK

END (AIR CONDITIONING HARNESS ASSEMBLY IS DEFECTIVE)

NG

REPLACE AIR CONDITIONING AMPLIFIER ASSEMBLY

5.CHECK FOR DTC
a.

Clear the DTCs.

Click hereVehicle Interior>HEATING / AIR CONDITIONING>AIR CONDITIONING SYSTEM(for Automatic Air Conditioning System)>DTC CHECK / CLEAR

Body Electrical > Air Conditioner > Clear DTCs
50002 121

b.

Check for DTCs.

Click hereVehicle Interior>HEATING / AIR CONDITIONING>AIR CONDITIONING SYSTEM(for Automatic Air Conditioning System)>DTC CHECK / CLEAR

Body Electrical > Air Conditioner > Trouble Codes
50001 121
OK:

DTC B1442/42 is not output



Result:
Proceed to
OK
NG



OK

NG

REPLACE AIR CONDITIONING AMPLIFIER ASSEMBLY