Home › Audio / Visual / Telematics › PARK ASSIST / MONITORING › TOYOTA PARKING ASSIST-SENSOR SYSTEM
RM33K0E _56 Audio / Visual / Telematics _043543 PARK ASSIST / MONITORING _0227352 TOYOTA PARKING ASSIST-SENSOR SYSTEM Y

PARK ASSIST / MONITORING  TOYOTA PARKING ASSIST-SENSOR SYSTEM  HOW TO PROCEED WITH TROUBLESHOOTING  


CAUTION / NOTICE / HINT

HINT:

Use the following procedure to troubleshoot the Toyota parking assist-sensor system.


PROCEDURE

1.VEHICLE BROUGHT TO WORKSHOP
Result:
Proceed to
NEXT



NEXT

2.CUSTOMER PROBLEM ANALYSIS
2.CUSTOMER PROBLEM ANALYSIS
HINT:
·

In troubleshooting, confirm that the problem symptoms have been accurately identified. Preconceptions should be discarded in order to make an accurate judgment. To clearly understand what the problem symptoms are, it is extremely important to ask the customer about the problem and the conditions at the time the malfunction occurred.

·

Gather as much information as possible for reference. Past problems that seem unrelated may also help in some cases.

·

The following 5 items are important points for problem analysis:


What Vehicle model, system name
When Date, time, occurrence frequency, whether the problem occurred recently or has been occurring for a long time
Where Whether the problem occurs at a specific location
Under what conditions?
·

Whether the ignition switch was ON, whether the engine has started etc.

·

Was it raining?

·

If there was a mistaken display, what type of buzzer sounded? (close-range/medium-range/long-range detection)

·

Are any third-party parts installed? (In particular, has the vehicle height been lowered by a suspension or shocks made for that purpose?)


How did it happen? Problem symptoms


Result:
Proceed to
NEXT



NEXT

3.INSPECT BATTERY VOLTAGE
3.INSPECT BATTERY VOLTAGE
a.

Measure the battery voltage.

Standard voltage:

11 to 14 V


If the voltage is below 11 V, recharge or replace the battery before proceeding to the next step.


b.

Check the fuses and relays.


c.

Check the connector connections and terminals to make sure that there are no abnormalities such as loose connections, deformation, etc.


Result:
Proceed to
NEXT



NEXT

4.PROBLEM SYMPTOM CONFIRMATION
4.PROBLEM SYMPTOM CONFIRMATION
Result:
Result Proceed to
Symptom does not occur A
Symptom occurs B



A

5.SYMPTOM SIMULATION

B

6.PROBLEM SYMPTOMS TABLE
5.SYMPTOM SIMULATION

Result:
Proceed to
NEXT



NEXT

6.PROBLEM SYMPTOMS TABLE
6.PROBLEM SYMPTOMS TABLE

Result:
Result Proceed to
Fault is not listed in Problem Symptoms Table A
Fault is listed in Problem Symptoms Table B



A

7.PERFORM TROUBLESHOOTING BASED ON MALFUNCTION SYMPTOM

B

8.CIRCUIT INSPECTION
7.PERFORM TROUBLESHOOTING BASED ON MALFUNCTION SYMPTOM

NEXT

8.CIRCUIT INSPECTION
8.CIRCUIT INSPECTION
Result:
Proceed to
NEXT



NEXT

9.IDENTIFICATION OF PROBLEM
9.IDENTIFICATION OF PROBLEM
Result:
Proceed to
NEXT



NEXT

10.REPAIR OR REPLACE
10.REPAIR OR REPLACE
Result:
Proceed to
NEXT



NEXT

11.CONFIRMATION TEST
11.CONFIRMATION TEST
Result:
Proceed to
NEXT



NEXT

END