Home › Engine / Hybrid System › 2TR-FE STARTING › ENGINE SWITCH(for LHD)
RM33K0E _51 Engine / Hybrid System _043589 2TR-FE STARTING _0227363 ENGINE SWITCH(for LHD) A

2TR-FE STARTING  ENGINE SWITCH(for LHD)  REMOVAL  


PROCEDURE

Hide 45100 1.REMOVE STEERING WHEEL ASSEMBLY

Hide 55410C 2.REMOVE INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY

Hide 89611 3.REMOVE ENGINE SWITCH

a.
A351905

Detach the claw on the top side of the engine switch, and then tilt the engine switch and detach the claw on the bottom side as shown in the illustration.


b.

Disconnect the engine switch connector and remove the engine switch.