55667
1.REMOVE INSTRUMENT PANEL REGISTER BEZEL GARNISH (for Automatic Air Conditioning System)
55011A
2.REMOVE NO. 1 INSTRUMENT PANEL GARNISH SUB-ASSEMBLY (for Automatic Air Conditioning System)
55012A
3.REMOVE NO. 2 INSTRUMENT PANEL GARNISH SUB-ASSEMBLY (for Automatic Air Conditioning System)
55405B
4.REMOVE INSTRUMENT CENTER CLUSTER FINISH PANEL SUB-ASSEMBLY (for Automatic Air Conditioning System)
55900
5.REMOVE AIR CONDITIONING CONTROL ASSEMBLY (WINDOW DEFOGGER SWITCH) (for Automatic Air Conditioning System)
|
Place hand here |
|
Remove in this Direction |
Detach the clip and remove the air conditioning control assembly (window defogger switch).
Disconnect the 2 connectors.
55905J
6.REMOVE CONTROL KNOB SUB-ASSEMBLY (for Manual Air Conditioning System)
55667
7.REMOVE INSTRUMENT PANEL REGISTER BEZEL GARNISH (for Manual Air Conditioning System)
55011A
8.REMOVE NO. 1 INSTRUMENT PANEL GARNISH SUB-ASSEMBLY (for Manual Air Conditioning System)
55012A
9.REMOVE NO. 2 INSTRUMENT PANEL GARNISH SUB-ASSEMBLY (for Manual Air Conditioning System)
55405B
10.REMOVE INSTRUMENT CENTER CLUSTER FINISH PANEL SUB-ASSEMBLY (for Manual Air Conditioning System)
55905A
11.REMOVE HEATER CONTROL KNOB (for Manual Air Conditioning System)
84013A
12.REMOVE INTEGRATION PANEL SUB-ASSEMBLY WITH AIR CONDITIONING CONTROL ASSEMBLY (WINDOW DEFOGGER SWITCH) (for Manual Air Conditioning System)
|
Place hand here |
|
Remove in this Direction |
Put protective tape around the integration panel sub-assembly.
Detach the clip and remove the integration panel sub-assembly with air conditioning control assembly (window defogger switch).
Disconnect the 3 connectors.
55906A
13.DISCONNECT DEFROSTER DAMPER CONTROL CABLE SUB-ASSEMBLY (for Manual Air Conditioning System)
Detach the claw and disconnect the defroster damper control cable sub-assembly.
55909A
14.DISCONNECT AIR MIX DAMPER CONTROL CABLE SUB-ASSEMBLY (for Manual Air Conditioning System)
Detach the claw and disconnect the air mix damper control cable sub-assembly.