1. PRECAUTION
After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from battery terminal notice before proceeding with work.
Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION
2.DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
When disconnecting the cable, some systems need to be initialized after the cable is reconnected.
Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION
17705
3.REMOVE AIR CLEANER CAP SUB-ASSEMBLY WITH NO. 1 AIR CLEANER HOSE
17801
4.REMOVE AIR CLEANER FILTER ELEMENT SUB-ASSEMBLY
17701
5.REMOVE AIR CLEANER CASE SUB-ASSEMBLY
16361A
6.REMOVE FAN AND GENERATOR V BELT
27020
7.REMOVE GENERATOR ASSEMBLY
Disconnect the generator connector.
Remove the terminal cap.
Remove the bolt and generator bracket.
Remove the nut and disconnect the wire harness from terminal B.
Remove the 3 bolts and generator assembly.